Refine
Document Type
- Article (15) (remove)
Language
- English (8)
- German (6)
- Multiple languages (1)
Keywords
- Additive manufacturing (1)
- Anhaftung (1)
- Aquaculture (1)
- Austenitic stainless steels (1)
- Behälterbau (1)
- Biokompatibilität (1)
- Chemische Beständigkeit (1)
- Corrosion resistance (1)
- Dynamic testing plant (1)
- Dynamic tests (1)
In Anlehnung an das Tempcore-Verfahren wurde an wärmebehandeltem Stabstahl das Zugverfestigungsverhalten des Kernes, der Außenhaut sowie dem gesamten Stab experimentell und numerisch ermittelt. Es zeigte sich, dass die Dehnungen am Kern und am äußeren Rand gleich sind und der Einfluss des Kerngefüges entscheidend für den Beginn der Einschnürung in der Außenhaut ist. Eine Verbesserung der Eigenschaften des Kerngefüges kann somit die Bruchempfindlichkeit des gesamten Stabes reduzieren.
Durch eine Aufweitung des Kristallgitters mittels Niedertemperatur-Eindiffusion von Kohlenstoff und/oder Stickstoffatomen können in der Randzone von nichtrostenden Stählen eine hohe Härte und eine hohe Verschleißbeständigkeit erzeugt werden, ohne dass zusätzliche Legierungselemente verwendet werden müssen. Die metallkundlichen Hintergründe für die Härtung, die Wirkung auf Verschleißvorgänge und mögliche Anwendungsbereiche werden geschildert. Anhand von Reibwerten wird gezeigt, in welcher Weise das Reibungsverhalten bei Schraubverbindungen durch die Behandlung verändert wird. Über Migrationsversuche wird nachgewiesen, dass die Ionenabgabe durch die Oberflächenhärtung nicht erhöht, sondern sogar abgesenkt wird. Neben dem besseren Verschleißschutz und einer höheren Dauerfestigkeit sichert diese Oberflächenbehandlung am nichtrostenden Stahl den Schutz gegen die Kontamination von Pharmaprodukten durch Metallabrieb/-ionen. Tests an oberflächengehärteten Edelstahlproben ergaben weiterhin, dass durch die Oberflächenhärtung die Biokompatibilität des nichtrostenden Edelstahls nicht beeinträchtigt wird.
Die Beständigkeit von hochlegierten korrosions- und säurebeständigen Stählen wird primär durch den Chromgehalt bestimmt. Allerdings gibt es entlang der Wertschöpfungskette von der Stahlerschmelzung bis zum fertigen Produkt eine Vielzahl weiterer Einflussfaktoren. Dem Schleifen kommt hier eine besondere Bedeutung zu, da es je nach Wahl der Prozessparameter sowohl zu einer signifikanten Verschlechterung als auch zu einer Verbesserung der Korrosionsbeständigkeit führen kann. Im vorliegenden Beitrag wird aufgezeigt, dass die erzeugte Rauheit nur eine begrenzte Aussagekraft bietet. Vielmehr erhöhen lokale Mikrodefekte die Anfälligkeit gegen Lochfraß – je nach Ausprägung und Anzahl. Die Automatisierung für die Innenbearbeitung von Behältern im pharmazeutischen Apparatebau kann dabei zu einer signifikanten Verbesserung der Oberfläche und einem homogeneren Erscheinungsbild führen.
Thermochemical surface hardening is used to overcome the weak mechanical performance of austenitic and duplex stainless steels. Both low-temperature carburizing and nitrocarburizing can improve the hardness, wear, galling, and cavitation resistance, while maintaining their good corrosion resistance. Therefore, it is crucial to not form chromium-rich precipitates during hardening as these can deteriorate the passivity of the alloy. The hardening parameters, the chemical composition of the steel, and the manufacturing route of a component determine whether precipitates are formed. This article gives an overview of suitable alloys for low-temperature surface hardening and the performance under corrosive loading.
In automotive a lot of electromagnetically, pyrotechnically or mechanically driven actuators are integrated to run comfort systems and to control safety systems in modern passenger cars. Using shape memory alloys (SMA) the existing systems could be simplified, performing the same function through new mechanisms with reduced size, weight, and costs. A drawback for the use of SMA in safety systems is the lack of materials knowledge concerning the durability of the switching function (long-time stability of the shape memory effect). Pedestrian safety systems play a significant role to reduce injuries and fatal casualties caused by accidents. One automotive safety system for pedestrian protection is the bonnet lifting system. Based on such an application, this article gives an introduction to existing bonnet lifting systems for pedestrian protection, describes the use of quick changing shape memory actuators and the results of the study concerning the long-time stability of the tested NiTi-wires. These wires were trained, exposed up to 4years at elevated temperatures (up to 140°C) and tested regarding their phase change temperatures, times, and strokes. For example, it was found that A P-temperature is shifted toward higher temperatures with longer exposing periods and higher temperatures. However, in the functional testing plant a delay in the switching time could not be detected. This article gives some answers concerning the long-time stability of NiTi-wires that were missing till now. With this knowledge, the number of future automotive applications using SMA can be increased. It can be concluded, that the use of quick changing shape memory actuators in safety systems could simplify the mechanism, reduce maintenance and manufacturing costs and should be insertable also for other automotive applications.
Investigation of magnetic effects on austenitic stainless steels after low temperature carburization
(2018)
This work aims at investigating the magnetic effects of austenitc stainless steels which can occur after a low temperature carburisation depending on the alloy. Samples were prepared of different alloys and subjected to a multiple low temperature carburisation to obtain different treatment conditions for each alloy. The layer characterisation was carried out by light microscope and also by hardening profiles and shows that the layer develops with each additional treatment cycle. A lattice expansion could be detected in all treated samples by X-ray diffraction. Magnetisability was measured using Feritscope and SQUID measurements. Not all alloys showed magnetisability after treatment. In addition to MFM measurements, experiments with Ferrofluid were also used to visualize the magnetic areas. These studies show that only about half of the formed layer becomes magnetisable and has a domain-like structure.
Ferromagnetism is of increasing importance in the growing field of electromobility and data storage. In stable austenitic steels, the occurrence of ferromagnetism is not expected and would also interfere with many applications. However, ferromagnetism in austenitic stainless steels after low-temperature nitriding has already been shown in the past. Herein, the presence of ferromagnetism in austenitic steels is discovered after low-temperature carburization (Kolsterizing), which represents a novel and unique finding. A zone of expanded austenite is established on various austenitic stainless steels by low-temperature carburization and the respective ferromagnetism is investigated in relation to the alloy composition. The ferromagnetism occurring is determined by means of a commercial magnetoinductive sensor (Feritscope). Ferromagnetic domains are visualized by magnetic force microscopy and a ferrofluid. X-ray diffraction measurements indicate a clear difference in the lattice expansion of the different alloys. Furthermore, a different appearance of the magnetizable microstructure regions (magnetic domain structure) is detected depending on the grain orientation determined by electron backscatter diffraction (EBSD). Strongly pronounced magnetic domains show no linear lattice defects, whereas in small magnetizable areas linear lattice defects are detected by electron channeling contrast imaging and EBSD.
Thermal shape memory alloys show extraordinary material properties and can be used as actuators, dampers and sensors. Since their discovery in the middle of the last century they have been investigated and further developed. The majority of the industrial applications with the highest material sales can still be found in the medical industry, where they are used due to their superelastic and thermal shape memory effect, e.g. as stents or as guidewires and tools in the minimal invasive surgery. Particularly in recent years, more and more applications have been developed for other industrial fields, e.g. for the household goods, civil engineering and automotive sector. In this context it is worth mentioning that for the latter sector, million seller series applications have found their way into some European automobile manufacturers. The German VDI guideline for shape memory alloys introduced in 2017 will give the material a further boost in application. Last but not least the new production technologies of additive manufacturing with metal laser sintering plants open up additional applications for these multifunctional materials. This paper gives an overview of the extraordinary material properties of shape memory components, shows examples of different applications and discusses European trends against the background of the most recent standard and new production technologies.