Refine
Year of publication
Document Type
- Conference Proceeding (46)
- Article (30)
- Patent (3)
Keywords
- Antenna arrays (1)
- BCH codes (1)
- Binary codes (1)
- Block codes (2)
- CONCATENATED codes (1)
- CONVOLUTION codes (1)
- Capacity (1)
- Channel capacity (1)
- Channel coding (1)
- Channel estimation (3)
Institute
This work studies a wind noise reduction approach for communication applications in a car environment. An endfire array consisting of two microphones is considered as a substitute for an ordinary cardioid microphone capsule of the same size. Using the decomposition of the multichannel Wiener filter (MWF), a suitable beamformer and a single-channel post filter are derived. Due to the known array geometry and the location of the speech source, assumptions about the signal properties can be made to simplify the MWF beamformer and to estimate the speech and noise power spectral densities required for the post filter. Even for closely spaced microphones, the different signal properties at the microphones can be exploited to achieve a significant reduction of wind noise. The proposed beamformer approach results in an improved speech signal regarding the signal-to-noise-ratio and keeps the linear speech distortion low. The derived post filter shows equal performance compared to known approaches but reduces the effort for noise estimation.
Soft-input decoding of concatenated codes based on the Plotkin construction and BCH component codes
(2020)
Low latency communication requires soft-input decoding of binary block codes with small to medium block lengths.
In this work, we consider generalized multiple concatenated (GMC) codes based on the Plotkin construction. These codes are similar to Reed-Muller (RM) codes. In contrast to RM codes, BCH codes are employed as component codes. This leads to improved code parameters. Moreover, a decoding algorithm is proposed that exploits the recursive structure of the concatenation. This algorithm enables efficient soft-input decoding of binary block codes with small to medium lengths. The proposed codes and their decoding achieve significant performance gains compared with RM codes and recursive GMC decoding.
Error correction coding based on soft-input decoding can significantly improve the reliability of non-volatile flash memories. This work proposes a soft-input decoder for generalized concatenated (GC) codes. GC codes are well suited for error correction in flash memories for high reliability data storage. We propose GC codes constructed from inner extended binary Bose-Chaudhuri-Hocquenghem (BCH) codes and outer Reed-Solomon codes. The extended BCH codes enable an efficient hard-input decoding. Furthermore, a low-complexity soft-input decoding method is proposed. This bit-flipping decoder uses a fixed number of test patterns and an algebraic decoder for soft-decoding. An acceptance criterion for the final candidate codeword is proposed. Combined with error and erasure decoding of the outer Reed-Solomon codes, this acceptance criterion can improve the decoding performance and reduce the decoding complexity. The presented simulation results show that the proposed bit-flipping decoder in combination with outer error and erasure decoding can outperform maximum likelihood decoding of the inner codes.
This work investigates soft input decoding for generalized concatenated (GC) codes. The GC codes are constructed from inner nested binary Bose-Chaudhuri-Hocquenghem (BCH)codes and outer Reed-Solomon (RS) codes. In order to enable soft input decoding for the inner BCH block codes, a sequential stack decoding algorithm is used. Ordinary stack decoding of binary block codes requires the complete trellis of the code.
In this work a representation of the block codes based on the trellises of supercodes is proposed in order to reduce the memory requirements for the representation of the BCH codes. Results for the decoding performance of the overall GC code are presented.
Furthermore, an efficient hardware implementation of the GC decoder is proposed.
Generalised concatenated (GC) codes are well suited for error correction in flash memories for high-reliability data storage. The GC codes are constructed from inner extended binary Bose–Chaudhuri–Hocquenghem (BCH) codes and outer Reed–Solomon codes. The extended BCH codes enable high-rate GC codes and low-complexity soft input decoding. This work proposes a decoder architecture for high-rate GC codes. For such codes, outer error and erasure decoding are mandatory. A pipelined decoder architecture is proposed that achieves a high data throughput with hard input decoding. In addition, a low-complexity soft input decoder is proposed. This soft decoding approach combines a bit-flipping strategy with algebraic decoding. The decoder components for the hard input decoding can be utilised which reduces the overhead for the soft input decoding. Nevertheless, the soft input decoding achieves a significant coding gain compared with hard input decoding.
This letter introduces signal constellations based on multiplicative groups of Eisenstein integers, i.e., hexagonal lattices. These sets of Eisenstein integers are proposed as signal constellations for generalized spatial modulation. The algebraic properties of the new constellations are investigated and a set partitioning technique is developed. This technique can be used to design coded modulation schemes over hexagonal lattices.
Side Channel Attack Resistance of the Elliptic Curve Point Multiplication using Gaussian Integers
(2020)
Elliptic curve cryptography is a cornerstone of embedded security. However, hardware implementations of the elliptic curve point multiplication are prone to side channel attacks. In this work, we present a new key expansion algorithm which improves the resistance against timing and simple power analysis attacks. Furthermore, we consider a new concept for calculating the point multiplication, where the points of the curve are represented as Gaussian integers. Gaussian integers are subset of the complex numbers, such that the real and imaginary parts are integers. Since Gaussian integer fields are isomorphic to prime fields, this concept is suitable for many elliptic curves. Representing the key by a Gaussian integer expansion is beneficial to reduce the computational complexity and the memory requirements of a secure hardware implementation.
Side Channel Attack Resistance of the Elliptic Curve Point Multiplication using Eisenstein Integers
(2020)
Asymmetric cryptography empowers secure key exchange and digital signatures for message authentication. Nevertheless, consumer electronics and embedded systems often rely on symmetric cryptosystems because asymmetric cryptosystems are computationally intensive. Besides, implementations of cryptosystems are prone to side-channel attacks (SCA). Consequently, the secure and efficient implementation of asymmetric cryptography on resource-constrained systems is demanding. In this work, elliptic curve cryptography is considered. A new concept for an SCA resistant calculation of the elliptic curve point multiplication over Eisenstein integers is presented and an efficient arithmetic over Eisenstein integers is proposed. Representing the key by Eisenstein integer expansions is beneficial to reduce the computational complexity and the memory requirements of an SCA protected implementation.
Error correction coding for optical communication and storage requires high rate codes that enable high data throughput and low residual errors. Recently, different concatenated coding schemes were proposed that are based on binary BCH codes with low error correcting capabilities. In this work, low-complexity hard- and soft-input decoding methods for such codes are investigated. We propose three concepts to reduce the complexity of the decoder. For the algebraic decoding we demonstrate that Peterson's algorithm can be more efficient than the Berlekamp-Massey algorithm for single, double, and triple error correcting BCH codes. We propose an inversion-less version of Peterson's algorithm and a corresponding decoding architecture. Furthermore, we propose a decoding approach that combines algebraic hard-input decoding with soft-input bit-flipping decoding. An acceptance criterion is utilized to determine the reliability of the estimated codewords. For many received codewords the stopping criterion indicates that the hard-decoding result is sufficiently reliable, and the costly soft-input decoding can be omitted. To reduce the memory size for the soft-values, we propose a bit-flipping decoder that stores only the positions and soft-values of a small number of code symbols. This method significantly reduces the memory requirements and has little adverse effect on the decoding performance.
The introduction of multi level cell (MLC) and triple level cell (TLC) technologies reduced the reliability of flash memories significantly compared with single level cell (SLC) flash. The reliability of the flash memory suffers from various errors causes. Program/erase cycles, read disturb, and cell to cell interference impact the threshold voltages. With pre-defined fixed read thresholds a voltage shift increases the bit error rate (BER). This work proposes a read threshold calibration method that aims on minimizing the BER by adapting the read voltages. The adaptation of the read thresholds is based on the number of errors observed in the codeword protecting a small amount of meta-data. Simulations based on flash measurements demonstrate that this method can significantly reduce the BER of TLC memories.
Non-volatile NAND flash memories store information as an electrical charge. Different read reference voltages are applied to read the data. However, the threshold voltage distributions vary due to aging effects like program erase cycling and data retention time. It is necessary to adapt the read reference voltages for different life-cycle conditions to minimize the error probability during readout. In the past, methods based on pilot data or high-resolution threshold voltage histograms were proposed to estimate the changes in voltage distributions. In this work, we propose a machine learning approach with neural networks to estimate the read reference voltages. The proposed method utilizes sparse histogram data for the threshold voltage distributions. For reading the information from triple-level cell (TLC) memories, several read reference voltages are applied in sequence. We consider two histogram resolutions. The simplest histogram consists of the zero-and-one ratios for the hard decision read operation, whereas a higher resolution is obtained by considering the quantization levels for soft-input decoding. This approach does not require pilot data for the voltage adaptation. Furthermore, only a few measurements of extreme points of the threshold voltage distributions are required as training data. Measurements with different conditions verify the proposed approach. The resulting neural networks perform well under other life-cycle conditions.
The performance and reliability of non-volatile NAND flash memories deteriorate as the number of program/erase cycles grows. The reliability also suffers from cell to cell interference, long data retention time, and read disturb. These processes effect the read threshold voltages. The aging of the cells causes voltage shifts which lead to high bit error rates (BER) with fixed pre-defined read thresholds. This work proposes two methods that aim on minimizing the BER by adjusting the read thresholds. Both methods utilize the number of errors detected in the codeword of an error correction code. It is demonstrated that the observed number of errors is a good measure for the voltage shifts and is utilized for the initial calibration of the read thresholds. The second approach is a gradual channel estimation method that utilizes the asymmetrical error probabilities for the one-to-zero and zero-to-one errors that are caused by threshold calibration errors. Both methods are investigated utilizing the mutual information between the optimal read voltage and the measured error values.
Numerical results obtained from flash measurements show that these methods reduce the BER of NAND flash memories significantly.
The Burrows–Wheeler transformation (BWT) is a reversible block sorting transform that is an integral part of many data compression algorithms. This work proposes a memory-efficient pipelined decoder for the BWT. In particular, the authors consider the limited context order BWT that has low memory requirements and enable fast encoding. However, the decoding of the limited context order BWT is typically much slower than the encoding. The proposed decoder pipeline provides a fast inverse BWT by splitting the decoding into several processing stages which are executed in parallel.
The multichannel Wiener filter (MWF) is a well-established noise reduction technique for speech processing. Most commonly, the speech component in a selected reference microphone is estimated. The choice of this reference microphone influences the broadband output signal-to-noise ratio (SNR) as well as the speech distortion. Recently, a generalized formulation for the MWF (G-MWF) was proposed that uses a weighted sum of the individual transfer functions from the speaker to the microphones to form a better speech reference resulting in an improved broadband output SNR. For the MWF, the influence of the phase reference is often neglected, because it has no impact on the narrow-band output SNR. The G-MWF allows an arbitrary choice of the phase reference especially in the context of spatially distributed microphones.
In this work, we demonstrate that the phase reference determines the overall transfer function and hence has an impact on both the speech distortion and the broadband output SNR. We propose two speech references that achieve a better signal-to-reverberation ratio (SRR) and an improvement in the broadband output SNR. Both proposed references are based on the phase of a delay-and-sum beamformer. Hence, the time-difference-of-arrival (TDOA) of the speech source is required to align the signals. The different techniques are compared in terms of SRR and SNR performance.
Codes over quotient rings of Lipschitz integers have recently attracted some attention. This work investigates the performance of Lipschitz integer constellations for transmission over the AWGN channel by means of the constellation figure of merit. A construction of sets of Lipschitz integers is presented that leads to a better constellation figure of merit compared to ordinary Lipschitz integer constellations. In particular, it is demonstrated that the concept of set partitioning can be applied to quotient rings of Lipschitz integers where the number of elements is not a prime number. It is shown that it is always possible to partition such quotient rings into additive subgroups in a manner that the minimum Euclidean distance of each subgroup is strictly larger than in the original set. The resulting signal constellations have a better performance for transmission over an additive white Gaussian noise channel compared to Gaussian integer constellations and to ordinary Lipschitz integer constellations.
Codes over quotient rings of Lipschitz integers have recently attracted some attention. This work investigates the performance of Lipschitz integer constellations for transmission over the AWGN channel by means of the constellation figure of merit. A construction of sets of Lipschitz integers that leads to a better constellation figure of merit compared to ordinary Lipschitz integer constellations is presented. In particular, it is demonstrated that the concept of set partitioning can be applied to quotient rings of Lipschitz integers where the number of elements is not a prime number. It is shown that it is always possible to partition such quotient rings into additive subgroups in a manner that the minimum Euclidean distance of each subgroup is strictly larger than in the original set. The resulting signal constellations have a better performance for transmission over an additive white Gaussian noise channel compared to Gaussian integer constellations and to ordinary Lipschitz integer constellations. In addition, we present multilevel code constructions for the new signal constellations.
Large persistent memory is crucial for many applications in embedded systems and automotive computing like AI databases, ADAS, and cutting-edge infotainment systems. Such applications require reliable NAND flash memories made for harsh automotive conditions. However, due to high memory densities and production tolerances, the error probability of NAND flash memories has risen. As the number of program/erase cycles and the data retention times increase, non-volatile NAND flash memories' performance and dependability suffer. The read reference voltages of the flash cells vary due to these aging processes. In this work, we consider the issue of reference voltage adaption. The considered estimation procedure uses shallow neural networks to estimate the read reference voltages for different life-cycle conditions with the help of histogram measurements. We demonstrate that the training data for the neural networks can be enhanced by using shifted histograms, i.e., a training of the neural networks is possible based on a few measurements of some extreme points used as training data. The trained neural networks generalize well for other life-cycle conditions.
Mutual Information Analysis for Generalized Spatial Modulation Systems With Multilevel Coding
(2022)
Generalized Spatial Modulation (GSM) enables a trade-off between very high spectral efficiencies and low hardware costs for massive MIMO systems. This is achieved by transmitting information via the selection of active antennas from a set of available antennas besides the transmission of conventional data symbols. GSM systems have been investigated concerning various aspects like suitable signal constellations, efficient detection algorithms, hardware implementations, spatial precoding, and error control coding. On the other hand, determining the capacity of GSM is challenging because no closed-form expressions have been found so far. This paper investigates the mutual information for different GSM variants. We consider a multilevel coding approach, where the antenna selection and IQ modulation are encoded independently. Combined with multistage decoding, such an approach enables low-complexity capacity-achieving coded modulation. The influence of the data symbols on the mutual information is illuminated. We analyze the portions of mutual information related to antenna selection and the IQ modulation processes which depend on the GSM variant and the signal constellation. Moreover, the potential of spatial modulation for massive MIMO systems with many transmit antennas is investigated. Especially in systems with many transmit antennas much information can be conveyed by antenna selection.
This work introduces new signal constellations based on Eisenstein integers, i.e., the hexagonal lattice. These sets of Eisenstein integers have a cardinality which is an integer power of three. They are proposed as signal constellations for representation in the equivalent complex baseband model, especially for applications like physical-layer network coding or MIMO transmission where the constellation is required to be a subset of a lattice. It is shown that these constellations form additive groups where the addition over the complex plane corresponds to the addition with carry over ternary Galois fields. A ternary set partitioning is derived that enables multilevel coding based on ternary error-correcting codes. In the subsets, this partitioning achieves a gain of 4.77 dB, which results from an increased minimum squared Euclidean distance of the signal points. Furthermore, the constellation-constrained capacities over the AWGN channel and the related level capacities in case of ternary multilevel coding are investigated. Simulation results for multilevel coding based on ternary LDPC codes are presented which show that a performance close to the constellation-constrained capacities can be achieved.
Modular arithmetic over integers is required for many cryptography systems. Montgomeryreduction is an efficient algorithm for the modulo reduction after a multiplication. Typically, Mont-gomery reduction is used for rings of ordinary integers. In contrast, we investigate the modularreduction over rings of Gaussian integers. Gaussian integers are complex numbers where the real andimaginary parts are integers. Rings over Gaussian integers are isomorphic to ordinary integer rings.In this work, we show that Montgomery reduction can be applied to Gaussian integer rings. Twoalgorithms for the precision reduction are presented. We demonstrate that the proposed Montgomeryreduction enables an efficient Gaussian integer arithmetic that is suitable for elliptic curve cryptogra-phy. In particular, we consider the elliptic curve point multiplication according to the randomizedinitial point method which is protected against side-channel attacks. The implementation of thisprotected point multiplication is significantly faster than comparable algorithms over ordinary primefields.
The Montgomery multiplication is an efficient method for modular arithmetic. Typically, it is used for modular arithmetic over integer rings to prevent the expensive inversion for the modulo reduction. In this work, we consider modular arithmetic over rings of Gaussian integers. Gaussian integers are subset of the complex numbers such that the real and imaginary parts are integers. In many cases Gaussian integer rings are isomorphic to ordinary integer rings. We demonstrate that the concept of the Montgomery multiplication can be extended to Gaussian integers. Due to independent calculation of the real and imaginary parts, the computation complexity of the multiplication is reduced compared with ordinary integer modular arithmetic. This concept is suitable for coding applications as well as for asymmetric key cryptographic systems, such as elliptic curve cryptography or the Rivest-Shamir-Adleman system.
Embodiments are generally related to the field of channel and source coding of data to be sent over a channel, such as a communication link or a data memory. Some specific embodiments are related to a method of encoding data for transmission over a channel, a corresponding decoding method, a coding device for performing one or both of these methods and a computer program comprising instructions to cause said coding device to perform one or both of said methods.
Method and device for error correction coding based on high-rate generalized concatenated codes
(2017)
Field error correction coding is particularly suitable for applications in non-volatile flash memories. We describe a method for error correction encoding of data to be stored in a memory device, a corresponding method for decoding a codeword matrix resulting from the encoding method, a coding device, and a computer program for performing the methods on the coding device, using a new construction for high-rate generalized concatenated (GC) codes. The codes, which are well suited for error correction in flash memories for high reliability data storage, are constructed from inner nested binary Bose-Chaudhuri-Hocquenghem (BCH) codes and outer codes, preferably Reed-Solomon (RS) codes. For the inner codes extended BCH codes are used, where only single parity-check codes are applied in the first level of the GC code. This enables high-rate codes.
A soft input decoding method and a decoder for generalized concatenated (GC) codes. The GC codes are constructed from inner nested block codes, such as binary Bose-Chaudhuri-Hocquenghem, BCH, codes and outer codes, such as Reed-Solomon, RS, codes. In order to enable soft input decoding for the inner block codes, a sequential stack decoding algorithm is used. Ordinary stack decoding of binary block codes requires the complete trellis of the code. In one aspect, the present invention applies instead a representation of the block codes based on the trellises of supercodes in order to reduce the memory requirements for the representation of the inner codes. This enables an efficient hardware implementation. In another aspect, there is provided a soft input decoding method and device employing a sequential stack decoding algorithm in combination with list-of-two decoding which is particularly well suited for applications that require very low residual error rates.
This work proposes a construction for low-density parity-check (LDPC) codes over finite Gaussian integer fields. Furthermore, a new channel model for codes over Gaussian integers is introduced and its channel capacity is derived. This channel can be considered as a first order approximation of the additive white Gaussian noise channel with hard decision detection where only errors to nearest neighbors in the signal constellation are considered. For this channel, the proposed LDPC codes can be decoded with a simple non-probabilistic iterative decoding algorithm similar to Gallager's decoding algorithm A.
The computational complexity of the optimal maximum likelihood (ML) detector for spatial modulation increases rapidly as more transmit antennas or larger modulation orders are employed. Hence, ML detection may be infeasible for higher bit rates. This work proposes an improved suboptimal detection algorithm based on the Gaussian approximation method. It is demonstrated that the new method is closely related to the previously published signal vector based detection and the modified maximum ratio combiner, but can improve the detection performance compared to these methods. Furthermore, the performance of different signal constellations with suboptimal detection is investigated. Simulation results indicate that the performance loss compared to ML detection depends heavily on the signal constellation, where the recently proposed Eisenstein integer constellations are beneficial compared to classical QAM or PSK constellations.
Multi-dimensional spatial modulation is a multipleinput/ multiple-output wireless transmission technique, that uses only a few active antennas simultaneously. The computational complexity of the optimal maximum-likelihood (ML) detector at the receiver increases rapidly as more transmit antennas or larger modulation orders are employed. ML detection may be infeasible for higher bit rates. Many suboptimal detection algorithms for spatial modulation use two-stage detection schemes where the set of active antennas is detected in the first stage and the transmitted symbols in the second stage. Typically, these detection schemes use the ML strategy for the symbol detection. In this work, we consider a suboptimal detection algorithm for the second detection stage. This approach combines equalization and list decoding. We propose an algorithm for multi-dimensional signal constellations with a reduced search space in the second detection stage through set partitioning. In particular, we derive a set partitioning from the properties of Hurwitz integers. Simulation results demonstrate that the new algorithm achieves near-ML performance. It significantly reduces the complexity when compared with conventional two-stage detection schemes. Multi-dimensional constellations in combination with suboptimal detection can even outperform conventional signal constellations in combination with ML detection.
This work proposes a suboptimal detection algorithm for generalized multistream spatial modulation. Many suboptimal detection algorithms for spatial modulation use two-stage detection schemes where the set of active antennas is detected in the first stage and the transmitted symbols in the second stage. For multistream spatial modulation with large signal constellations the second detection step typically dominates the detection complexity. With the proposed detection scheme, the modified Gaussian approximation method is used for detecting the antenna pattern. In order to reduce the complexity for detecting the signal points, we propose a combined equalization and list decoding approach. Simulation results demonstrate that the new algorithm achieves near-maximum-likelihood performance with small list sizes. It significantly reduces the complexity when compared with conventional two-stage detection schemes.
List decoding for concatenated codes based on the Plotkin construction with BCH component codes
(2021)
Reed-Muller codes are a popular code family based on the Plotkin construction. Recently, these codes have regained some interest due to their close relation to polar codes and their low-complexity decoding. We consider a similar code family, i.e., the Plotkin concatenation with binary BCH component codes. This construction is more flexible regarding the attainable code parameters. In this work, we consider a list-based decoding algorithm for the Plotkin concatenation with BCH component codes. The proposed list decoding leads to a significant coding gain with only a small increase in computational complexity. Simulation results demonstrate that the Plotkin concatenation with the proposed decoding achieves near maximum likelihood decoding performance. This coding scheme can outperform polar codes for moderate code lengths.
In diesem Beitrag wird die Hardware-Implementierung eines Datenkompressionsverfahrens auf einem FPGA vorgestellt. Das Verfahren wurde speziell für Kompression kurzer Datenblöcke in Flash-Speichern entwickelt. Dabei werden Quelldaten mithilfe eines Encoders komprimiert und mit einem Decoder verlustlos dekomprimiert. Durch die Reduktion der Datenrate kann in Flash-Speichern die Übertragungsdauer zum Lesen und Schreiben reduziert werden. Ebenso ist eine Kompression von Nutzdaten sinnvoll, um zusätzliche Redundanzen für einen Fehlerschutz einfügen zu können, ohne den Gesamtspeicherplatzbedarf zu erhöhen.
Digitale Signaturen zum Überprüfen der Integrität von Daten, beispielsweise von Software-Updates, gewinnen zunehmend an Bedeutung. Im Bereich der eingebetteten Systeme kommen derzeit wegen der geringen Komplexität noch überwiegend symmetri-sche Verschlüsselungsverfahren zur Berechnung eines Authentifizierungscodes zum Einsatz. Asym-metrische Kryptosysteme sind rechenaufwendiger, bieten aber mehr Sicherheit, weil der Schlüssel zur Authentifizierung nicht geheim gehalten werden muss. Asymmetrische Signaturverfahren werden typischerweise zweistufig berechnet. Der Schlüssel wird nicht direkt auf die Daten angewendet, sondern auf deren Hash-Wert, der mit Hilfe einer Hash-funktion zuvor berechnet wurde. Zum Einsatz dieser Verfahren in eingebetteten Systemen ist es erforder-lich, dass die Hashfunktion einen hinreichend gro-ßen Datendurchsatz ermöglicht. In diesem Beitrag wird eine effiziente Hardware-Implementierung der SHA-256 Hashfunktion vorgestellt.
This paper studies suitable models for the identification of nonlinear acoustic systems. A cascaded structure of nonlinear filters is proposed that contains several parallel branches, consisting of polynomial functions followed by a linear filter for each order of nonlinearity. The second order of nonlinearity is additionally modelled with a parallel branch, containing a Volterra filter. These are followed by a long linear FIR filter that is able to model the room acoustics. The model is applied to the identification of a tube power amplifier feeding a guitar loudspeaker cabinet in an acoustic room. The adaptive identification is performed by the normalized least mean square (NLMS) algorithm. Compared with a generalized polynomial Hammerstein (GPH) model, the accuracy in modelling the dedicated real world system can be improved to a greater extend than increasing the order of nonlinearity in the GPH model.
This letter proposes two contributions to improve the performance of transmission with generalized multistream spatial modulation (SM). In particular, a modified suboptimal detection algorithm based on the Gaussian approximation method is proposed. The proposed modifications reduce the complexity of the Gaussian approximation method and improve the performance for high signal-to-noise ratios. Furthermore, this letter introduces signal constellations based on Hurwitz integers, i.e., a 4-D lattice. Simulation results demonstrate that these signal constellations are beneficial for generalized SM with two active antennas.
This paper proposes a novel transmission scheme for generalized multistream spatial modulation. This new approach uses one Mannheim error correcting codes over Gaussian or Eisenstein integers as multidimensional signal constellations. These codes enable a suboptimal decoding strategy with near maximum likelihood performance for transmission over the additive white Gaussian noise channel. In this contribution, this decoding algorithm is generalized to the detection for generalized multistream spatial modulation. The proposed method can outperform conventional generalized multistream spatial modulation with respect to decoding performance, detection complexity, and spectral efficiency.
In this letter, we present an approach to building a new generalized multistream spatial modulation system (GMSM), where the information is conveyed by the two active antennas with signal indices and using all possible active antenna combinations. The signal constellations associated with these antennas may have different sizes. In addition, four-dimensional hybrid frequency-phase modulated signals are utilized in GMSM. Examples of GMSM systems are given and computer simulation results are presented for transmission over Rayleigh and deep Nakagami- m flat-fading channels when maximum-likelihood detection is used. The presented results indicate a significant improvement of characteristics compared to the best-known similar systems.
Code-based cryptography is a promising candidate for post-quantum public-key encryption. The classic McEliece system uses binary Goppa codes, which are known for their good error correction capability. However, the key generation and decoding procedures of the classic McEliece system have a high computation complexity. Recently, q-ary concatenated codes over Gaussian integers were proposed for the McEliece cryptosystem together with the one-Mannheim error channel, where the error values are limited to Mannheim weight one. For this channel, concatenated codes over Gaussian integers achieve a higher error correction capability than maximum distance separable (MDS) codes with bounded minimum distance decoding. This improves the work factor regarding decoding attacks based on information-set decoding. This work proposes an improved construction for codes over Gaussian integers. These generalized concatenated codes extent the rate region where the work factor is beneficial compared to MDS codes. They allow for shorter public keys for the same level of security as the classic Goppa codes. Such codes are beneficial for lightweight code-based cryptosystems.
Generalized Concatenated Codes over Gaussian and Eisenstein Integers for Code-Based Cryptography
(2021)
The code-based McEliece and Niederreiter cryptosystems are promising candidates for post-quantum public-key encryption. Recently, q-ary concatenated codes over Gaussian integers were proposed for the McEliece cryptosystem together with the one-Mannheim error channel, where the error values are limited to Mannheim weight one. Due to the limited error values, the codes over Gaussian integers achieve a higher error correction capability than maximum distance separable (MDS) codes with bounded minimum distance decoding. This higher error correction capability improves the work factor regarding decoding attacks based on information-set decoding. The codes also enable a low complexity decoding algorithm for decoding beyond the guaranteed error correction capability. In this work, we extend this coding scheme to codes over Eisenstein integers. These codes have advantages for the Niederreiter system. Additionally, we propose an improved code construction based on generalized concatenated codes. These codes extent the rate region where the work factor is beneficial compared to MDS codes. Moreover, generalized concatenated codes are more robust against structural attacks than ordinary concatenated codes.
In this paper we propose a method to determine the active speaker for each time-frequency point in the noisy signals of a microphone array. This detection is based on a statistical model where the speech signals as well as noise signals are assumed to be multivariate Gaussian random variables in the Fourier domain. Based on this model we derive a maximum-likelihood detector for the active speaker. The decision is based on the a posteriori signal to noise ratio (SNR) of a speaker dependent max-SNR beamformer.
In this article, we give the construction of new four-dimensional signal constellations in the Euclidean space, which represent a certain combination of binary frequency-shift keying (BFSK) and M-ary amplitude-phase-shift keying (MAPSK). Description of such signals and the formulas for calculating the minimum squared Euclidean distance are presented. We have developed an analytic building method for even and odd values of M. Hence, no computer search and no heuristic methods are required. The new optimized BFSK-MAPSK (M = 5,6,···,16) signal constructions are built for the values of modulation indexes h =0.1,0.15,···,0.5 and their parameters are given. The results of computer simulations are also provided. Based on the obtained results we can conclude, that BFSK-MAPSK systems outperform similar four-dimensional systems both in terms of minimum squared Euclidean distance and simulated symbol error rate.
Four-Dimensional Hurwitz Signal Constellations, Set Partitioning, Detection, and Multilevel Coding
(2021)
The Hurwitz lattice provides the densest four-dimensional packing. This fact has motivated research on four-dimensional Hurwitz signal constellations for optical and wireless communications. This work presents a new algebraic construction of finite sets of Hurwitz integers that is inherently accompanied by a respective modulo operation. These signal constellations are investigated for transmission over the additive white Gaussian noise (AWGN) channel. It is shown that these signal constellations have a better constellation figure of merit and hence a better asymptotic performance over an AWGN channel when compared with conventional signal constellations with algebraic structure, e.g., two-dimensional Gaussian-integer constellations or four-dimensional Lipschitz-integer constellations. We introduce two concepts for set partitioning of the Hurwitz integers. The first method is useful to reduce the computational complexity of the symbol detection. This suboptimum detection approach achieves near-maximum-likelihood performance. In the second case, the partitioning exploits the algebraic structure of the Hurwitz signal constellations. We partition the Hurwitz integers into additive subgroups in a manner that the minimum Euclidean distance of each subgroup is larger than in the original set. This enables multilevel code constructions for the new signal constellations.
Reliability is a crucial aspect of non-volatile NAND flash memories, and it is essential to thoroughly analyze the channel to prevent errors and ensure accurate readout. Es-timating the read reference voltages (RRV s) is a significant challenge due to the multitude of physical effects involved. The question arises which features are useful and necessary for the RRV estimation. Various possible features require specialized hardware or specific readout techniques to be usable. In contrast we consider sparse histograms based on the decision thresholds for hard-input and soft-input decoding. These offer a distinct advantage as they are derived directly from the raw readout data without the need for decoding. This paper focuses on the information-theoretic study of different features, especially on the exploration of the mutual information (MI) between feature vector and RRV. In particular, we investigate the dependency of the MI on the resolution of the histograms. With respect to the RRV estimation, sparse histograms provide sufficient information for near-optimum estimation.
Error correction coding based on soft-input decoding can significantly improve the reliability of flash memories. Such soft-input decoding algorithms require reliability information about the state of the memory cell. This work proposes a channel model for soft-input decoding that considers the asymmetric error characteristic of multi-level cell (MLC) and triple-level cell (TLC) memories. Based on this model, an estimation method for the channel state information is devised which avoids additional pilot data for channel estimation. Furthermore, the proposed method supports page-wise read operations.
Spatial modulation (SM) is a low-complexity multiple-input/multiple-output transmission technique that combines index modulation and quadrature amplitude modulation for wireless communications. In this work, we consider the problem of link adaption for generalized spatial modulation (GSM) systems that use multiple active transmit antennas simultaneously. Link adaption algorithms require a real-time estimation of the link quality of the time-variant communication channels, e.g., by means of estimating the mutual information. However, determining the mutual information of SM is challenging because no closed-form expressions have been found so far. Recently, multilayer feedforward neural networks were applied to compute the achievable rate of an index modulation link. However, only a small SM system with two transmit and two receive antennas was considered. In this work, we consider a similar approach but investigate larger GSM systems with multiple active antennas. We analyze the portions of mutual information related to antenna selection and the IQ modulation processes, which depend on the GSM variant and the signal constellation.
The growing error rates of triple-level cell (TLC) and quadruple-level cell (QLC) NAND flash memories have led to the application of error correction coding with soft-input decoding techniques in flash-based storage systems. Typically, flash memory is organized in pages where the individual bits per cell are assigned to different pages and different codewords of the error-correcting code. This page-wise encoding minimizes the read latency with hard-input decoding. To increase the decoding capability, soft-input decoding is used eventually due to the aging of the cells. This soft-decoding requires multiple read operations. Hence, the soft-read operations reduce the achievable throughput, and increase the read latency and power consumption. In this work, we investigate a different encoding and decoding approach that improves the error correction performance without increasing the number of reference voltages. We consider TLC and QLC flashes where all bits are jointly encoded using a Gray labeling. This cell-wise encoding improves the achievable channel capacity compared with independent page-wise encoding. Errors with cell-wise read operations typically result in a single erroneous bit per cell. We present a coding approach based on generalized concatenated codes that utilizes this property.
The Lempel–Ziv–Welch (LZW) algorithm is an important dictionary-based data compression approach that is used in many communication and storage systems. The parallel dictionary LZW (PDLZW) algorithm speeds up the LZW encoding by using multiple dictionaries. This simplifies the parallel search in the dictionaries. However, the compression gain of the PDLZW depends on the partitioning of the address space, i.e. on the sizes of the parallel dictionaries. This work proposes an address space partitioning technique that optimises the compression rate of the PDLZW. Numerical results for address spaces with 512, 1024, and 2048 entries demonstrate that the proposed address partitioning improves the performance of the PDLZW compared with the original proposal. These address space sizes are suitable for flash storage systems. Moreover, the PDLZW has relative high memory requirements which dominate the costs of a hardware implementation. This work proposes a recursive dictionary structure and a word partitioning technique that significantly reduce the memory size of the parallel dictionaries.
The code-based McEliece cryptosystem is a promising candidate for post-quantum cryptography. The sender encodes a message, using a public scrambled generator matrix, and adds a random error vector. In this work, we consider q-ary codes and restrict the Lee weight of the added error symbols. This leads to an increased error correction capability and a larger work factor for information-set decoding attacks. In particular, we consider codes over an extension field and use the one-Lee error channel, which restricts the error values to Lee weight one. For this channel model, generalized concatenated codes can achieve high error correction capabilities. We discuss the decoding of those codes and the possible gain for decoding beyond the guaranteed error correction capability.
This paper proposes a pipelined decoder architecture for generalised concatenated (GC) codes. These codes are constructed from inner binary Bose-Chaudhuri-Hocquenghem (BCH) and outer Reed-Solomon codes. The decoding of the component codes is based on hard decision syndrome decoding algorithms. The concatenated code consists of several small BCH codes. This enables a hardware architecture where the decoding of the component codes is pipelined. A hardware implementation of a GC decoder is presented and the cell area, cycle counts as well as the timing constraints are investigated. The results are compared to a decoder for long BCH codes with similar error correction performance. In comparison, the pipelined GC decoder achieves a higher throughput and has lower area consumption.
Flash-Speicher wurden ursprünglich als Speichermedium für Digitalkameras entwickelt, finden inzwischen aber in vielen Bereichen Anwendung.
Die in Konstanz ansässige Firma Hyperstone GmbH ist ein führender Anbieter von Flashcontrollern für Anwendungen mit erhöhten Anforderungen an Zuverlässigkeit und Datenintegrität. Bereits seit April 2011 kooperiert die Firma Hyperstone mit der HTWG Konstanz bei der Entwicklung von Fehlerkorrekturverfahren für einen zuverlässigen Einsatz von Flash-Speichern. Aufgrund der rasanten Entwicklung bei Flashspeicherbausteinen ist auch eine stetige Weiterentwicklung der Korrekturverfahren notwendig. Im Rahmen dieser Kooperation wurde inzwischen zwei Flashcontroller mit sehr leistungsfähiger Fehlerkorrektur entwickelt. Der folgende Artikel gibt Einblick in den Einsatz von Flash-Speichern und erläutert die Notwendigkeit für eine leistungsfähige Fehlerkorrektur.