Refine
Document Type
- Conference Proceeding (22)
- Article (6)
- Part of a Book (1)
Language
- English (29) (remove)
Has Fulltext
- no (29) (remove)
Keywords
- Abrasive grain material (1)
- Actuators (1)
- Aquaculture (1)
- Austenitic stainless steels (1)
- Corrosion Resistance (1)
- Corrosion resistance (1)
- Duplex stainless steel (1)
- Dynamic testing plant (1)
- Dynamic tests (1)
- Espanded austenite, Magnetic force microscopy, Low temperature carburisation, Ferrofluid (1)
The evolution of strain induced martensite in austenitic stainless steel AISI 304 was investigated in a rolling contact on a two-discs-tribometer. The effects of surface roughness, slip and normal force as well as the number of load cycles were examined. In comparison to the investigations of martensitic phase transformation during cold rolling, the applied stresses are considerably lower. The formation of strain induced martensite was detected in-situ by means of a FERITSCOPE MP30 and ex-situ by optical microscopy after etching with Kane etchant. Both number of load cycles and magnitude of normal force appeared to be the main influencing factors regarding strain induced martensitic evolution in low stress rolling contacts.
In the automotive industry a strong effort has been undertaken to reduce the weight of modern vehicles. In order to reduce the energy consumption and to improve the environmental sustainability, the importance of weight reduction activities is even growing faster. As lightweight designing is becoming more and more expensive and show less potential savings, new approaches are needed. One promising technology could be the use of shape memory elements. In the last years a lot of potential application possibilities were presented, demonstrating the benefit of these functional elements in automotive design solutions: they often reduce complexity, weight and design space of an actuation device and enable new functions. In addition they work silently and are therefore ideally suitable for comfort applications in the passenger cabin. Because of the current trend to electric vehicle the hitherto existing drawback of a high electrical energy consumption of shape memory actuators in some design proposals is not given any more.
Pitting susceptibility of metastable austenitic stainless steels as a function of surface conditions
(2019)
The influence of surface roughness and local defects on pitting susceptibility of type 304 (UNS S30400) and type 301 (UNS S30100) in chloride solution were investigated. Because the mechanical properties can be regarded as decisive for the achieved surface quality, different properties of the base material were obtained by cold rolling the metastable austenites. This was done before the surfaces were finished. Therefor the surfaces were treated by different grinding parameters to generate different surface conditions and different defects. As a reference, different standardised surface finishes were used.
By using and comparing different methods for the characterization of surface roughness and surface texture, it is possible to find a relationship between the quantity and characteristics of local defects on the one hand and pitting susceptibility on the other hand. For the machining parameters used, a ranking of the influencing factors on the corrosion resistance achieved could be determined.
The automated application of software-based solutions for estimating the pitting susceptibility of machined surfaces and components will be discussed using concrete examples.
This paper presents the current state of development and selected technological challenges in the application of ecologically and economically sustainable nets for aquaculture based on ongoing development projects. These aim at the development of a new material system of high-strength stainless steel wires as net material with environmentally compatible antifouling properties for nearshore and offshore aquacultures. Current plastic netting materials will be replaced with high-strength stainless steel to provide a more environmentally friendly system that can withstand more severe mechanical stresses (waves, storms, tides and predators). A new antifouling strategy is expected to solve current challenges, such as ecological damage (e.g., due to pollution from copper-containing antifouling substances or microplastics), high maintenance costs (e.g., cleaning and repairs), and shorter service life. Approaches for the next development steps are presented based on previous experience as well as calculation models based on this experience.
Magnetic effects on austenitic stainless steels, formed during a low temperature carburizing depending on the alloy composition are discussed in this paper. Samples of different austenitic stainless steel alloys have been subjected to a multiple low-temperature carburization. Layer characteriszation with light microscope and hardness profiles show a growth of the layer thickness. The formation of an expanded austenite layer (lattice expansion) could be detected by X-ray diffraction (XRD). Feritscope was used to determine the magnetizability, whereby not all austenitic alloys form a magnetizability after treatment. Furthermore, test procedures were developed to visualize the magnetizability. For this purpose, magnetic force microscope measurements and investigations with ferrofluid were carried out and a fir tree ferromagnetic layer strucure could be proven.
Thermochemical surface hardening is used to overcome the weak mechanical performance of austenitic and duplex stainless steels. Both low-temperature carburizing and nitrocarburizing can improve the hardness, wear, galling, and cavitation resistance, while maintaining their good corrosion resistance. Therefore, it is crucial to not form chromium-rich precipitates during hardening as these can deteriorate the passivity of the alloy. The hardening parameters, the chemical composition of the steel, and the manufacturing route of a component determine whether precipitates are formed. This article gives an overview of suitable alloys for low-temperature surface hardening and the performance under corrosive loading.
Investigation of magnetic effects on austenitic stainless steels after low temperature carburization
(2018)
This work aims at investigating the magnetic effects of austenitc stainless steels which can occur after a low temperature carburisation depending on the alloy. Samples were prepared of different alloys and subjected to a multiple low temperature carburisation to obtain different treatment conditions for each alloy. The layer characterisation was carried out by light microscope and also by hardening profiles and shows that the layer develops with each additional treatment cycle. A lattice expansion could be detected in all treated samples by X-ray diffraction. Magnetisability was measured using Feritscope and SQUID measurements. Not all alloys showed magnetisability after treatment. In addition to MFM measurements, experiments with Ferrofluid were also used to visualize the magnetic areas. These studies show that only about half of the formed layer becomes magnetisable and has a domain-like structure.
Ferromagnetism is of increasing importance in the growing field of electromobility and data storage. In stable austenitic steels, the occurrence of ferromagnetism is not expected and would also interfere with many applications. However, ferromagnetism in austenitic stainless steels after low-temperature nitriding has already been shown in the past. Herein, the presence of ferromagnetism in austenitic steels is discovered after low-temperature carburization (Kolsterizing), which represents a novel and unique finding. A zone of expanded austenite is established on various austenitic stainless steels by low-temperature carburization and the respective ferromagnetism is investigated in relation to the alloy composition. The ferromagnetism occurring is determined by means of a commercial magnetoinductive sensor (Feritscope). Ferromagnetic domains are visualized by magnetic force microscopy and a ferrofluid. X-ray diffraction measurements indicate a clear difference in the lattice expansion of the different alloys. Furthermore, a different appearance of the magnetizable microstructure regions (magnetic domain structure) is detected depending on the grain orientation determined by electron backscatter diffraction (EBSD). Strongly pronounced magnetic domains show no linear lattice defects, whereas in small magnetizable areas linear lattice defects are detected by electron channeling contrast imaging and EBSD.
The corrosion resistance of stainless steels is massively influenced by the condition of their surface. The surface quality includes the topography of the surface, the structure and composition of the passive layer, and the surface near structure of the base material. These factors are influenced by final physical/chemical surface treatments. The presented work shows significantly lower corrosion resistance for mechanical machined specimens than for etched specimens. It also turns out that the rougher the surface, the lower the corrosion resistance gets. However, there is no general finding which shows if blasted or grinded surfaces are more appropriate, but a dependency on process parameters and the characteristics on corrosive exposure in terms of corrosion behavior. The results show that not only the surface roughness Ra has an influence on corrosion behavior but also the shape of peaks and valleys which are evolved by surface treatments. Imperfections in the base material, like sulfidic inclusions lead to a weaker passive layer, respectively, to a decrease of the corrosion resistance. By using special passivating techniques the corrosion resistance of stainless steels can be increased to a higher level in comparison to common passivation.
This paper compares the surface morphology of differently finished austenitic stainless steel AISI 316L, also in combination with low temperature carburization. Milled and tumbled surfaces were analyzed by means of corrosion resistance and surface morphology. The results of potentiodynamic measurements show that professional grinding operations with SiC and Al2O3 always lead to a better corrosion resistance of low temperature carburized surfaces compared to the untreated reference in the used acidified chloride solution. Big influence on the corrosion resistance of vibratory ground or tumbled surfaces has the amount of plastic deformation while machining, that has to be kept low for austenitic stainless steels. Due to the high ductility, plastic deformation can lead to the formation of meta stable pits that can be initiation points of corrosion. The formation of meta stable pits can be aggravated by low temperature diffusion processes.
Improving the tribological properties of Stainless Steels by low-temperature surface hardening
(2022)
Hot isostatic pressing (HIP) allows the production of complex components geometry. Generally, a high quality of the components is achieved due to the well managed composition of the metal powder and the non-isotropic properties. If a duplex stainless steel is produced, a heat treatment after the HIP-process is necessary to remove precipitations like carbides, nitrides and intermetallic phases. In a new process, the sintering step should be combined with the heat treatment. In this case a high cooling rate is necessary to avoid precipitations in duplex stainless steels. In this work, the influence of the HIP-temperature and the wall thickness on corrosion resistance, microstructure and impact strength were investigated. The results should help to optimize the process parameters like temperature and cooling rate. For the investigation, two HIP-temperatures were tested in a classical HIP-process step with a defined cooling rate. An additional heat treatment was not conducted. The specimens were cut from different sectors of the HIP-block. For investigation of the corrosion resistance, the critical pitting temperature was determined with electrochemical method according to EN ISO 17864. An impact test was used to determine the impact transition temperature. Metallographic investigations show the microstructure in the different sectors of the HIP-block.
The project aims for the development of a new material system from high tensile stainless steel wires as net material with environmentally compatible antifouling properties for off-shore fish farm cages. Therefore, current net materials from textiles (polyamide) shall be partially replaced by high strength stainless steel in order to have a more environmentally compatible system which meets the more severe mechanical loads (waves, storms, predators (sharks)). With a new antifouling strategy current issues like reduced ecological damage (e.g. due to copper disposal), lower maintenance costs (e.g. cleaning) and reduced durability shall be resolved.