Refine
Year of publication
Document Type
- Conference Proceeding (31)
- Article (15)
- Other Publications (7)
- Working Paper (5)
- Book (2)
- Part of a Book (1)
Language
- English (31)
- German (29)
- Multiple languages (1)
Keywords
- Abrasive grain material (1)
- Abwasserreinigung (1)
- Actuators (1)
- Adaptive Steuerung (1)
- Additive manufacturing (1)
- Aktor (1)
- Aktuatorik (1)
- Anhaftung (1)
- Aquaculture (1)
- Aufsatzsammlung (1)
Improving the tribological properties of Stainless Steels by low-temperature surface hardening
(2022)
Die Beständigkeit von hochlegierten korrosions- und säurebeständigen Stählen wird primär durch den Chromgehalt bestimmt. Allerdings gibt es entlang der Wertschöpfungskette von der Stahlerschmelzung bis zum fertigen Produkt eine Vielzahl weiterer Einflussfaktoren. Dem Schleifen kommt hier eine besondere Bedeutung zu, da es je nach Wahl der Prozessparameter sowohl zu einer signifikanten Verschlechterung als auch zu einer Verbesserung der Korrosionsbeständigkeit führen kann. Im vorliegenden Beitrag wird aufgezeigt, dass die erzeugte Rauheit nur eine begrenzte Aussagekraft bietet. Vielmehr erhöhen lokale Mikrodefekte die Anfälligkeit gegen Lochfraß – je nach Ausprägung und Anzahl. Die Automatisierung für die Innenbearbeitung von Behältern im pharmazeutischen Apparatebau kann dabei zu einer signifikanten Verbesserung der Oberfläche und einem homogeneren Erscheinungsbild führen.
Durch eine Aufweitung des Kristallgitters mittels Niedertemperatur-Eindiffusion von Kohlenstoff und/oder Stickstoffatomen können in der Randzone von nichtrostenden Stählen eine hohe Härte und eine hohe Verschleißbeständigkeit erzeugt werden, ohne dass zusätzliche Legierungselemente verwendet werden müssen. Die metallkundlichen Hintergründe für die Härtung, die Wirkung auf Verschleißvorgänge und mögliche Anwendungsbereiche werden geschildert. Anhand von Reibwerten wird gezeigt, in welcher Weise das Reibungsverhalten bei Schraubverbindungen durch die Behandlung verändert wird. Über Migrationsversuche wird nachgewiesen, dass die Ionenabgabe durch die Oberflächenhärtung nicht erhöht, sondern sogar abgesenkt wird. Neben dem besseren Verschleißschutz und einer höheren Dauerfestigkeit sichert diese Oberflächenbehandlung am nichtrostenden Stahl den Schutz gegen die Kontamination von Pharmaprodukten durch Metallabrieb/-ionen. Tests an oberflächengehärteten Edelstahlproben ergaben weiterhin, dass durch die Oberflächenhärtung die Biokompatibilität des nichtrostenden Edelstahls nicht beeinträchtigt wird.
Ferromagnetism is of increasing importance in the growing field of electromobility and data storage. In stable austenitic steels, the occurrence of ferromagnetism is not expected and would also interfere with many applications. However, ferromagnetism in austenitic stainless steels after low-temperature nitriding has already been shown in the past. Herein, the presence of ferromagnetism in austenitic steels is discovered after low-temperature carburization (Kolsterizing), which represents a novel and unique finding. A zone of expanded austenite is established on various austenitic stainless steels by low-temperature carburization and the respective ferromagnetism is investigated in relation to the alloy composition. The ferromagnetism occurring is determined by means of a commercial magnetoinductive sensor (Feritscope). Ferromagnetic domains are visualized by magnetic force microscopy and a ferrofluid. X-ray diffraction measurements indicate a clear difference in the lattice expansion of the different alloys. Furthermore, a different appearance of the magnetizable microstructure regions (magnetic domain structure) is detected depending on the grain orientation determined by electron backscatter diffraction (EBSD). Strongly pronounced magnetic domains show no linear lattice defects, whereas in small magnetizable areas linear lattice defects are detected by electron channeling contrast imaging and EBSD.
This paper presents the current state of development and selected technological challenges in the application of ecologically and economically sustainable nets for aquaculture based on ongoing development projects. These aim at the development of a new material system of high-strength stainless steel wires as net material with environmentally compatible antifouling properties for nearshore and offshore aquacultures. Current plastic netting materials will be replaced with high-strength stainless steel to provide a more environmentally friendly system that can withstand more severe mechanical stresses (waves, storms, tides and predators). A new antifouling strategy is expected to solve current challenges, such as ecological damage (e.g., due to pollution from copper-containing antifouling substances or microplastics), high maintenance costs (e.g., cleaning and repairs), and shorter service life. Approaches for the next development steps are presented based on previous experience as well as calculation models based on this experience.
Low temperature carburizing of a series of austenitic stainless with various combinations of chromium and nickel equivalents was performed. The investigation of the response towards low temperature carburized for three stainless steels with various Cr- and Ni-equivalents showed that the carbon uptake depends significantly on the chemical composition of the base material. The higher carbon content in the expanded austenite layer of specimen 6 (1.4565) and specimen 4 (1.4539/AISI 904L) compared to specimen 2 (1.4404/AISI 316L) is assumed to be mainly related to the difference in the specimens’ chromium content. More chromium leads to more lattice expansion. Along with the higher carbon content, higher hardness values and higher compressive residual stresses in the expanded austenite zone are introduced than for low temperature carburized AISI 316L. The residual stresses obtained from X-ray diffraction lattice strain investigation depend strongly on the chosen X-ray elastic constants. Presently, no values are known for carbon (or nitrogen) stabilized expanded austenite. Nevertheless, first principle elastic constants for γ′&minus Fe4C appear to provide realistic residual stress values. Magnetic force microscopy and measurement with an eddy current probe indicate that austenitic stainless steels can become ferromagnetic upon carburizing, similar for low temperature nitriding. The apparent transition from para- to ferromagnetism cannot be attributed entirely to the interstitially dissolved carbon content in the formed expanded austenite layer but appears to depend also on the metallic composition of the alloy, in particular the Ni content.
Thermochemical surface hardening is used to overcome the weak mechanical performance of austenitic and duplex stainless steels. Both low-temperature carburizing and nitrocarburizing can improve the hardness, wear, galling, and cavitation resistance, while maintaining their good corrosion resistance. Therefore, it is crucial to not form chromium-rich precipitates during hardening as these can deteriorate the passivity of the alloy. The hardening parameters, the chemical composition of the steel, and the manufacturing route of a component determine whether precipitates are formed. This article gives an overview of suitable alloys for low-temperature surface hardening and the performance under corrosive loading.
Thermal shape memory alloys show extraordinary material properties and can be used as actuators, dampers and sensors. Since their discovery in the middle of the last century they have been investigated and further developed. The majority of the industrial applications with the highest material sales can still be found in the medical industry, where they are used due to their superelastic and thermal shape memory effect, e.g. as stents or as guidewires and tools in the minimal invasive surgery. Particularly in recent years, more and more applications have been developed for other industrial fields, e.g. for the household goods, civil engineering and automotive sector. In this context it is worth mentioning that for the latter sector, million seller series applications have found their way into some European automobile manufacturers. The German VDI guideline for shape memory alloys introduced in 2017 will give the material a further boost in application. Last but not least the new production technologies of additive manufacturing with metal laser sintering plants open up additional applications for these multifunctional materials. This paper gives an overview of the extraordinary material properties of shape memory components, shows examples of different applications and discusses European trends against the background of the most recent standard and new production technologies.
The project aims for the development of a new material system from high tensile stainless steel wires as net material with environmentally compatible antifouling properties for off-shore fish farm cages. Therefore, current net materials from textiles (polyamide) shall be partially replaced by high strength stainless steel in order to have a more environmentally compatible system which meets the more severe mechanical loads (waves, storms, predators (sharks)). With a new antifouling strategy current issues like reduced ecological damage (e.g. due to copper disposal), lower maintenance costs (e.g. cleaning) and reduced durability shall be resolved.
Martensitic stainless steels has a wide use, for example for blades, knifes or cutter. The best corrosion resistance of these materials is in hardened condition. For better mechanical properties a tempering is normally applied to increase the durability. The tempering is also reducing the hardness and finally the corrosion resistance. Austempering is meanly used at low alloyed steels and brings a good compromise between durability, hardness and corrosion resistance. For martensitic stainless steels, austempering is normally not a topic because of the very long tempering times.
This work shows first results of austempering of some standard martensitic stainless steels and the influence to corrosion resistance. For reference, hardened and also hardened and tempered specimens were investigated. The corrosions resistance was investigated by electrochemical methods.
Magnetic effects on austenitic stainless steels, formed during a low temperature carburizing depending on the alloy composition are discussed in this paper. Samples of different austenitic stainless steel alloys have been subjected to a multiple low-temperature carburization. Layer characteriszation with light microscope and hardness profiles show a growth of the layer thickness. The formation of an expanded austenite layer (lattice expansion) could be detected by X-ray diffraction (XRD). Feritscope was used to determine the magnetizability, whereby not all austenitic alloys form a magnetizability after treatment. Furthermore, test procedures were developed to visualize the magnetizability. For this purpose, magnetic force microscope measurements and investigations with ferrofluid were carried out and a fir tree ferromagnetic layer strucure could be proven.
The first part of this work shows the development and application of a new material system using high strength duplex stainless steel wires as net material with environmentally compatible antifouling properties for off-shore fish farm cages. Current net materials from textiles (polyamide) shall be partially replaced by high strength duplex stainless steel in order to have a more environmentally compatible system which meets the more severe mechanical loads (waves, storms, predatores (sharks, seals)). With a new antifouling strategy current issues like reduced ecological damage (e.g. due to copper disposal), lower maintenance costs (e.g. cleaning) and reduced durability shall be resolved.
High strength steel wires are also widely used in geological protection systems, for example rockfall protection or slope stabilisation. Normally hot-dip galvanised carbon steel is used in this case. But in highly corrosive environments like coastal areas, volcanic areas or mines for example, other solutions with a high corrosion resistance and sufficient mechanical properties are necessary. Protection systems made of high strength duplex stainless steel wires enable a significantly longer service life of the portection systems and therefore a higher level of security.
Pitting susceptibility of metastable austenitic stainless steels as a function of surface conditions
(2019)
The influence of surface roughness and local defects on pitting susceptibility of type 304 (UNS S30400) and type 301 (UNS S30100) in chloride solution were investigated. Because the mechanical properties can be regarded as decisive for the achieved surface quality, different properties of the base material were obtained by cold rolling the metastable austenites. This was done before the surfaces were finished. Therefor the surfaces were treated by different grinding parameters to generate different surface conditions and different defects. As a reference, different standardised surface finishes were used.
By using and comparing different methods for the characterization of surface roughness and surface texture, it is possible to find a relationship between the quantity and characteristics of local defects on the one hand and pitting susceptibility on the other hand. For the machining parameters used, a ranking of the influencing factors on the corrosion resistance achieved could be determined.
The automated application of software-based solutions for estimating the pitting susceptibility of machined surfaces and components will be discussed using concrete examples.
Mechanical properties after stretching testings were calcu-lated and experimentally determined via Tempcore method for bar core, bar surface and whole bar cross section. It was displayed on the base of experiments and imitating simulation that deformation in core and surface areas of a bar are equal and therefore influence of structural parameters in the core area is principally decisive for initiating of neck forming in the surface area. The results showed that resistance to destruction of martensite surface layer has rather less effect on bar properties in general in comparison with previous investigations. It is concluded that improvement of core structure quality can help to lower brittleness of the whole bar. It was also proved that used techniques provide good concordance between the obtained results and experimental data. Therefore, the additivity rule for structural components can be used successfully for determination of whole bar parameters, taking into account thickness of surface layer that can be measured easily using hardness sensor. It will simplify practically quality control of products.
Investigation of magnetic effects on austenitic stainless steels after low temperature carburization
(2018)
This work aims at investigating the magnetic effects of austenitc stainless steels which can occur after a low temperature carburisation depending on the alloy. Samples were prepared of different alloys and subjected to a multiple low temperature carburisation to obtain different treatment conditions for each alloy. The layer characterisation was carried out by light microscope and also by hardening profiles and shows that the layer develops with each additional treatment cycle. A lattice expansion could be detected in all treated samples by X-ray diffraction. Magnetisability was measured using Feritscope and SQUID measurements. Not all alloys showed magnetisability after treatment. In addition to MFM measurements, experiments with Ferrofluid were also used to visualize the magnetic areas. These studies show that only about half of the formed layer becomes magnetisable and has a domain-like structure.
In Anlehnung an das Tempcore-Verfahren wurde an wärmebehandeltem Stabstahl das Zugverfestigungsverhalten des Kernes, der Außenhaut sowie dem gesamten Stab experimentell und numerisch ermittelt. Es zeigte sich, dass die Dehnungen am Kern und am äußeren Rand gleich sind und der Einfluss des Kerngefüges entscheidend für den Beginn der Einschnürung in der Außenhaut ist. Eine Verbesserung der Eigenschaften des Kerngefüges kann somit die Bruchempfindlichkeit des gesamten Stabes reduzieren.
Formgedächtnislegierungen
(2018)
Formgedächtnislegierungen sind »Legierungen, die nach geeigneter Behandlung aufgrund einer martensitischen Umwandlung ihre Gestalt in Abhängigkeit von der Temperatur ändern«. Derartige Materialien werden in den nächsten Jahrzehnten eine wachsende Rolle in der Technik spielen. Um die Eigenschaften dieser Werkstoffe optimal nutzen zu können, ist es wichtig, den Einfluss des Herstellungs- und Verarbeitungsprozesses auf ihre Anwendung zu kennen.
Das Buch behandelt die metallkundlichen Hintergründe und die Verwendungsmöglichkeiten der Formgedächtnislegierungen in verständlicher, auf den Anwender zugeschnittener Weise.
The electrochemical behavior for different surface conditions and different degrees of deformation of metastable austenitic stainless steel AISI 304 UNS S30400 were studied using critical pitting potential and electrochemical noise measurements. The influence on corrosion resistance by using different abrasives (silicon carbide and corundum) for surface finish by grinding is illustrated. For the characterization of local defects and surface topography, scanning electron microscopy (SEM) and tactile measurements were used. An inverse correlation between occurrence of local defects on the surface and critical pitting potential was found by using image processing. Therefore, gray scale values of different surfaces were compared. The influence of mass content of α'-martensite on the corrosion resistance is shown by comparing different qualities of surface finish. For smooth machined surfaces it can be shown that an increasing numbers of strain induced martensite is decreasing the corrosion resistance lightly. For low abrasive machining an inverse correlation between the critical pitting potential and surface roughness is given. However, for higher abrasive machining parameters, this correlation could not be found.
Durch Beanspruchungen bei der Fertigung oder in der Anwendung können metastabile austenitische Stähle eine Phasenumwandlung von ?- Austenit zu ?‘-Martensit durchlaufen. Verbunden damit sind Eigenschaftsänderungen, welche sich signifikant auf das Werkstoffverhalten unter mechanischer, tribologischer oder korrosiver Belastung auswirken können.
Um möglichen negativen Auswirkungen wie ungewollte Magnetisierbarkeit oder Beeinflussung von Fertigungsparameter sowie Korrosionseigenschaften zu unterbinden muss die martensitische Phase zunächst erfasst und quantifiziert werden.
Für diese Aufgabe stehen neben den bekannten und kostenintensiven Verfahren wie EBSD und XRD für die praxisnahe Anwendung das magneto-induktive Messverfahren und verschiedene Ätzmethoden zur Verfügung.
Anhand von Applikationen aus Anwendung, Fertigung und Forschung werden die Wirkweisen, Vorteile und Grenzen verschiedener Ätzverfahren und dem magneto-induktiv messenden FERITSCOPE® MP30 aufgezeigt. Ebenso werden ergänzende Methoden bzw. Techniken zur Validation der Verfahren diskutiert und erläutert.
In the automotive industry a strong effort has been undertaken to reduce the weight of modern vehicles. In order to reduce the energy consumption and to improve the environmental sustainability, the importance of weight reduction activities is even growing faster. As lightweight designing is becoming more and more expensive and show less potential savings, new approaches are needed. One promising technology could be the use of shape memory elements. In the last years a lot of potential application possibilities were presented, demonstrating the benefit of these functional elements in automotive design solutions: they often reduce complexity, weight and design space of an actuation device and enable new functions. In addition they work silently and are therefore ideally suitable for comfort applications in the passenger cabin. Because of the current trend to electric vehicle the hitherto existing drawback of a high electrical energy consumption of shape memory actuators in some design proposals is not given any more.
The evolution of strain induced martensite in austenitic stainless steel AISI 304 was investigated in a rolling contact on a two-discs-tribometer. The effects of surface roughness, slip and normal force as well as the number of load cycles were examined. In comparison to the investigations of martensitic phase transformation during cold rolling, the applied stresses are considerably lower. The formation of strain induced martensite was detected in-situ by means of a FERITSCOPE MP30 and ex-situ by optical microscopy after etching with Kane etchant. Both number of load cycles and magnitude of normal force appeared to be the main influencing factors regarding strain induced martensitic evolution in low stress rolling contacts.
As a result of increasing needs and shrinking resources, aquaculture is gaining progressively significance in the recent years. Ecological issues such as negative effects on the ecological system due to the high fish density in the farms, the use of copper as antifouling strategy etc. are very present, particularly regarding the increasing number of fish going to be produced in farms in the future. Current trends focus on larger farms operated offshore. To make these farms working safe and economical, reliability has to be improved and maintenance costs need to be reduced. Also, alternatives with higher mechanical strength compared to current textile net materials as well as common metal wires might be necessary. In the last years, a new net system made of high strength duplex stainless steel wires with environmentally friendly antifouling properties suitable for offshore applications was developed. The first nets are operating for one year now as predator protection (i.e. seals) for fish farms and show a good performance in cleaning capability and predator protection. But in the real usage, some corrosion effects in the contact points of the net made of duplex stainless steel 1.4362 occur which were not observed in preliminary tests in laboratory and at different test sites around the world. These corrosion effects endanger the sustainable success of the net system. In this work, the observed corrosion effects are investigated. A laboratory test, which simulates the movement in the contact points of the net, was developed. Two pieces of wire are bent in the middle and get stucked into each other. One wire is fixed at both ends and the second wire is fixed on one end. On the other end, a circular movement with 1-2 rps and a 1 cm displacement is applied. The movement generates friction between the wires and the passive layer will be locally damaged. When the movement stops, a repassivation starts. The passivity breakdown and the repassivation were measured with electrochemical techniques. During the friction phase, when the surface will be activated, the open circuit potential breaks down. When the friction stops, the OCP increases. Between the movement phases, measurements of critical pitting potential were done. Thereby the quality of repassivation was investigated. The tests were done in a 3% sodium chloride solution. Different temperatures were tested as well as the influence of air saturation and low oxygen content.
The corrosion resistance of stainless steels is massively influenced by the condition of their surface. The surface quality includes the topography of the surface, the structure and composition of the passive layer, and the surface near structure of the base material. These factors are influenced by final physical/chemical surface treatments. The presented work shows significantly lower corrosion resistance for mechanical machined specimens than for etched specimens. It also turns out that the rougher the surface, the lower the corrosion resistance gets. However, there is no general finding which shows if blasted or grinded surfaces are more appropriate, but a dependency on process parameters and the characteristics on corrosive exposure in terms of corrosion behavior. The results show that not only the surface roughness Ra has an influence on corrosion behavior but also the shape of peaks and valleys which are evolved by surface treatments. Imperfections in the base material, like sulfidic inclusions lead to a weaker passive layer, respectively, to a decrease of the corrosion resistance. By using special passivating techniques the corrosion resistance of stainless steels can be increased to a higher level in comparison to common passivation.
Corrosion
(2016)
Rostfreie Stähle
(2016)
Das Buch gibt einen Überblick über die metallkundlichen Grundlagen auf dem Gebiet der nichtrostenden Stähle und über das Einsatzverhalten dieser Werkstoffe. Es werden die notwendigen Hinweise für den Konstrukteur und den Verarbeiter von nichtrostenden Stählen gegeben. Einen Schwerpunkt stellt hierbei das Korrosionsverhalten dieser Werkstoffe dar.
This paper compares the surface morphology of differently finished austenitic stainless steel AISI 316L, also in combination with low temperature carburization. Milled and tumbled surfaces were analyzed by means of corrosion resistance and surface morphology. The results of potentiodynamic measurements show that professional grinding operations with SiC and Al2O3 always lead to a better corrosion resistance of low temperature carburized surfaces compared to the untreated reference in the used acidified chloride solution. Big influence on the corrosion resistance of vibratory ground or tumbled surfaces has the amount of plastic deformation while machining, that has to be kept low for austenitic stainless steels. Due to the high ductility, plastic deformation can lead to the formation of meta stable pits that can be initiation points of corrosion. The formation of meta stable pits can be aggravated by low temperature diffusion processes.