### Refine

#### Document Type

- Conference Proceeding (18)
- Article (9)
- Doctoral Thesis (5)
- Master's Thesis (1)
- Patent (1)
- Report (1)

#### Keywords

- Actuators (2)
- Aerobic fermentation (1)
- Beobachterentwurf (1)
- Channel Coding (1)
- Channel estimation (1)
- Continuous-discrete time observer (1)
- Cyberphysische Produkte (1)
- DO control (1)
- Data compression algorithms (1)
- Decoding (1)

#### Institute

- Institut für Systemdynamik - ISD (35) (remove)

Comparison and Identifiability Analysis of Friction Models for the Dither Motion of a Solenoid
(2018)

In this paper, the mechanical subsystem of a proportional solenoid excited by a dither signal is considered. The objective is to find a suitable friction model that reflects the characteristic mechanical properties of the dynamic system. Several different friction models from the literature are compared. The friction models are evaluated with respect to their accuracy as well as their practical identifiability, the latter being quantified based on the Fisher information matrix.

This paper describes an early lumping approach for generating a mathematical model of the heating process of a moving dual-layer substrate. The heat is supplied by convection and nonlinearly distributed over the whole considered spatial extend of the substrate. Using CFD simulations as a reference, two different modelling approaches have been investigated in order to achieve the most suitable model type. It is shown that due to the possibility of using the transition matrix for time discretization, an equivalent circuit model achieves superior results when compared to the Crank-Nicolson method. In order to maintain a constant sampling time for the in-visioned-control strategies, the effect of variable speed is transformed into a system description, where the state vector has constant length but a variable number of non-zero entries. The handling of the variable transport speed during the heating process is considered as the main contribution of this work. The result is a model, suitable for being used in future control strategies.

This work introduces new signal constellations based on Eisenstein integers, i.e., the hexagonal lattice. These sets of Eisenstein integers have a cardinality which is an integer power of three. They are proposed as signal constellations for representation in the equivalent complex baseband model, especially for applications like physical-layer network coding or MIMO transmission where the constellation is required to be a subset of a lattice. It is shown that these constellations form additive groups where the addition over the complex plane corresponds to the addition with carry over ternary Galois fields. A ternary set partitioning is derived that enables multilevel coding based on ternary error-correcting codes. In the subsets, this partitioning achieves a gain of 4.77 dB, which results from an increased minimum squared Euclidean distance of the signal points. Furthermore, the constellation-constrained capacities over the AWGN channel and the related level capacities in case of ternary multilevel coding are investigated. Simulation results for multilevel coding based on ternary LDPC codes are presented which show that a performance close to the constellation-constrained capacities can be achieved.

It is well known that signal constellations which are based on a hexagonal grid, so-called Eisenstein constellations, exhibit a performance gain over conventional QAM ones. This benefit is realized by a packing and shaping gain of the Eisenstein (hexagonal) integers in comparison to the Gaussian (complex) integers. Such constellations are especially relevant in transmission schemes that utilize lattice structures, e.g., in MIMO communications. However, for coded modulation, the straightforward approach is to combine Eisenstein constellations with ternary channel codes. In this paper, a multilevel-coding approach is proposed where encoding and multistage decoding can directly be performed with state-of-the-art binary channel codes. An associated mapping and a binary set partitioning are derived. The performance of the proposed approach is contrasted to classical multilevel coding over QAM constellations. To this end, both the single-user AWGN scenario and the (multiuser) MIMO broadcast scenario using lattice-reduction-aided preequalization are considered. Results obtained from numerical simulations with LDPC codes complement the theoretical aspects.

Generalised concatenated (GC) codes are well suited for error correction in flash memories for high-reliability data storage. The GC codes are constructed from inner extended binary Bose–Chaudhuri–Hocquenghem (BCH) codes and outer Reed–Solomon codes. The extended BCH codes enable high-rate GC codes and low-complexity soft input decoding. This work proposes a decoder architecture for high-rate GC codes. For such codes, outer error and erasure decoding are mandatory. A pipelined decoder architecture is proposed that achieves a high data throughput with hard input decoding. In addition, a low-complexity soft input decoder is proposed. This soft decoding approach combines a bit-flipping strategy with algebraic decoding. The decoder components for the hard input decoding can be utilised which reduces the overhead for the soft input decoding. Nevertheless, the soft input decoding achieves a significant coding gain compared with hard input decoding.

Flash memories are non-volatile memory devices. The rapid development of flash technologies leads to higher storage density, but also to higher error rates. This dissertation considers this reliability problem of flash memories and investigates suitable error correction codes, e.g. BCH-codes and concatenated codes. First, the flash cells, their functionality and error characteristics are explained. Next, the mathematics of the employed algebraic code are discussed. Subsequently, generalized concatenated codes (GCC) are presented. Compared to the commonly used BCH codes, concatenated codes promise higher code rates and lower implementation complexity. This complexity reduction is achieved by dividing a long code into smaller components, which require smaller Galois-Field sizes. The algebraic decoding algorithms enable analytical determination of the block error rate. Thus, it is possible to guarantee very low residual error rates for flash memories. Besides the complexity reduction, general concatenated codes can exploit soft information. This so-called soft decoding is not practicable for long BCH-codes. In this dissertation, two soft decoding methods for GCC are presented and analyzed. These methods are based on the Chase decoding and the stack algorithm. The last method explicitly uses the generalized concatenated code structure, where the component codes are nested subcodes. This property supports the complexity reduction. Moreover, the two-dimensional structure of GCC enables the correction of error patterns with statistical dependencies. One chapter of the thesis demonstrates how the concatenated codes can be used to correct two-dimensional cluster errors. Therefore, a two-dimensional interleaver is designed with the help of Gaussian integers. This design achieves the correction of cluster errors with the best possible radius. Large parts of this works are dedicated to the question, how the decoding algorithms can be implemented in hardware. These hardware architectures, their throughput and logic size are presented for long BCH-codes and generalized concatenated codes. The results show that generalized concatenated codes are suitable for error correction in flash memories, especially for three-dimensional NAND memory systems used in industrial applications, where low residual errors must be guaranteed.

Autonomous moving systems require very detailed information about their environment and potential colliding objects. Thus, the systems are equipped with high resolution sensors. These sensors have the property to generate more than one detection per object per time step. This results in an additional complexity for the target tracking algorithm, since standard tracking filters assume that an object generates at most one detection per object. This requires new methods for data association and system state filtering.
As new data association methods, in this thesis two different extensions of the Joint Integrated Probabilistic Data Association (JIPDA) filter to assign more than one detection to tracks are proposed.
The first method that is introduced, is a generalization of the JIPDA to assign a variable number of measurements to each track based on some predefined statistical models, which will be called Multi Detection - Joint Integrated Probabilistic Data Association (MD-JIPDA).
Since this scheme suffers from exponential increase of association hypotheses, also a new approximation scheme is presented. The second method is an extension for the special case, when the number and locations of measurements are a priori known. In preparation of this method, a new notation and computation scheme for the standard Joint Integrated Data Association is outlined, which also enables the derivation of a new fast approximation scheme called balanced permanent-JIPDA.
For state filtering, also two different concepts are applied: the Random Matrix Framework and the Measurement Generating Points. For the Random Matrix framework, first an alternative prediction method is proposed to account for kinematic state changes in the extension state prediction as well. Secondly, various update methods are investigated to account for the polar to Cartesian noise transformation problem. The filtering concepts are connected with the new MD-JIPDA and their characteristics analyzed with various Monte Carlo simulations.
In case an object can be modeled by a finite number of fixed Measurement Generating Points (MGP), also a proposition to track these object via a JIPDA filter is made. In this context, a fast Track-to-Track fusion algorithm is proposed as well and compared against the MGP-JIPDA.
The proposed algorithms are evaluated in two applications where scanning is done using radar sensors only. The first application is a typical automotive scenario, where a passenger car is equipped with six radar sensors to cover its complete environment.
In this application, the location of the measurements on an object can be considered stationary and that is has a rectangular shape. Thus, the MGP based algorithms are applied here. The filters are evaluated by tracking especially vehicles on nearside lanes.
The second application covers the tracking of vessels on inland waters. Here, two different kind of Radar systems are applied, but for both sensors a uniform distribution of the measurements over the target's extent can be assumed. Further, the assumption that the targets have elliptical shape holds, and so the Random Matrix Framework in combination with the MD-JIPDA is evaluated.
Exemplary test scenarios also illustrate the performance of this tracking algorithm.

Digitale Signaturen zum Überprüfen der Integrität von Daten, beispielsweise von Software-Updates, gewinnen zunehmend an Bedeutung. Im Bereich der eingebetteten Systeme kommen derzeit wegen der geringen Komplexität noch überwiegend symmetri-sche Verschlüsselungsverfahren zur Berechnung eines Authentifizierungscodes zum Einsatz. Asym-metrische Kryptosysteme sind rechenaufwendiger, bieten aber mehr Sicherheit, weil der Schlüssel zur Authentifizierung nicht geheim gehalten werden muss. Asymmetrische Signaturverfahren werden typischerweise zweistufig berechnet. Der Schlüssel wird nicht direkt auf die Daten angewendet, sondern auf deren Hash-Wert, der mit Hilfe einer Hash-funktion zuvor berechnet wurde. Zum Einsatz dieser Verfahren in eingebetteten Systemen ist es erforder-lich, dass die Hashfunktion einen hinreichend gro-ßen Datendurchsatz ermöglicht. In diesem Beitrag wird eine effiziente Hardware-Implementierung der SHA-256 Hashfunktion vorgestellt.

The Lempel-Ziv-Welch (LZW) algorithm is an important dictionary-based data compression approach that is used in many communication and storage systems. The parallel dictionary LZW (PDLZW) algorithm speeds up the LZW encoding by using multiple dictionaries. The PDLZW algorithm applies different dictionaries to store strings of different lengths, where each dictionary stores only strings of the same length. This simplifies the parallel search in the dictionaries for hardware implementations. The compression gain of the PDLZW depends on the partitioning of the address space, i.e. on the sizes of the parallel dictionaries. However, there is no universal partitioning that is optimal for all data sources. This work proposes an address space partitioning technique that optimizes the compression rate of the PDLZW using a Markov model for the data. Numerical results for address spaces with 512, 1024, and 2048 entries demonstrate that the proposed partitioning improves the performance of the PDLZW compared with the original proposal.

The Lempel–Ziv–Welch (LZW) algorithm is an important dictionary-based data compression approach that is used in many communication and storage systems. The parallel dictionary LZW (PDLZW) algorithm speeds up the LZW encoding by using multiple dictionaries. This simplifies the parallel search in the dictionaries. However, the compression gain of the PDLZW depends on the partitioning of the address space, i.e. on the sizes of the parallel dictionaries. This work proposes an address space partitioning technique that optimises the compression rate of the PDLZW. Numerical results for address spaces with 512, 1024, and 2048 entries demonstrate that the proposed address partitioning improves the performance of the PDLZW compared with the original proposal. These address space sizes are suitable for flash storage systems. Moreover, the PDLZW has relative high memory requirements which dominate the costs of a hardware implementation. This work proposes a recursive dictionary structure and a word partitioning technique that significantly reduce the memory size of the parallel dictionaries.

The Burrows–Wheeler transformation (BWT) is a reversible block sorting transform that is an integral part of many data compression algorithms. This work proposes a memory-efficient pipelined decoder for the BWT. In particular, the authors consider the limited context order BWT that has low memory requirements and enable fast encoding. However, the decoding of the limited context order BWT is typically much slower than the encoding. The proposed decoder pipeline provides a fast inverse BWT by splitting the decoding into several processing stages which are executed in parallel.

This work proposes a suboptimal detection algorithm for generalized multistream spatial modulation. Many suboptimal detection algorithms for spatial modulation use two-stage detection schemes where the set of active antennas is detected in the first stage and the transmitted symbols in the second stage. For multistream spatial modulation with large signal constellations the second detection step typically dominates the detection complexity. With the proposed detection scheme, the modified Gaussian approximation method is used for detecting the antenna pattern. In order to reduce the complexity for detecting the signal points, we propose a combined equalization and list decoding approach. Simulation results demonstrate that the new algorithm achieves near-maximum-likelihood performance with small list sizes. It significantly reduces the complexity when compared with conventional two-stage detection schemes.

This work proposes a construction for low-density parity-check (LDPC) codes over finite Gaussian integer fields. Furthermore, a new channel model for codes over Gaussian integers is introduced and its channel capacity is derived. This channel can be considered as a first order approximation of the additive white Gaussian noise channel with hard decision detection where only errors to nearest neighbors in the signal constellation are considered. For this channel, the proposed LDPC codes can be decoded with a simple non-probabilistic iterative decoding algorithm similar to Gallager's decoding algorithm A.

The introduction of multi level cell (MLC) and triple level cell (TLC) technologies reduced the reliability of flash memories significantly compared with single level cell (SLC) flash. The reliability of the flash memory suffers from various errors causes. Program/erase cycles, read disturb, and cell to cell interference impact the threshold voltages. With pre-defined fixed read thresholds a voltage shift increases the bit error rate (BER). This work proposes a read threshold calibration method that aims on minimizing the BER by adapting the read voltages. The adaptation of the read thresholds is based on the number of errors observed in the codeword protecting a small amount of meta-data. Simulations based on flash measurements demonstrate that this method can significantly reduce the BER of TLC memories.

Error correction coding based on soft-input decoding can significantly improve the reliability of non-volatile flash memories. This work proposes a soft-input decoder for generalized concatenated (GC) codes. GC codes are well suited for error correction in flash memories for high reliability data storage. We propose GC codes constructed from inner extended binary Bose-Chaudhuri-Hocquenghem (BCH) codes and outer Reed-Solomon codes. The extended BCH codes enable an efficient hard-input decoding. Furthermore, a low-complexity soft-input decoding method is proposed. This bit-flipping decoder uses a fixed number of test patterns and an algebraic decoder for soft-decoding. An acceptance criterion for the final candidate codeword is proposed. Combined with error and erasure decoding of the outer Reed-Solomon codes, this acceptance criterion can improve the decoding performance and reduce the decoding complexity. The presented simulation results show that the proposed bit-flipping decoder in combination with outer error and erasure decoding can outperform maximum likelihood decoding of the inner codes.

NAND flash memory is widely used for data storage due to low power consumption, high throughput, short random access latency, and high density. The storage density of the NAND flash memory devices increases from one generation to the next, albeit at the expense of storage reliability.
Our objective in this dissertation is to improve the reliability of the NAND flash memory with a low hard implementation cost. We investigate the error characteristic, i.e. the various noises of the NAND flash memory. Based on the error behavior at different life-aging stages, we develop offset calibration techniques that minimize the bit error rate (BER).
Furthermore, we introduce data compression to reduce the write amplification effect and support the error correction codes (ECC) unit. In the first scenario, the numerical results show that the data compression can reduce the wear-out by minimizing the amount of data that is written to the flash. In the ECC scenario, the compression gain is used to improve the ECC capability. Based on the first scenario, the write amplification effect can be halved for the considered target flash and data model. By combining the ECC and data compression, the NAND flash memory lifetime improves three fold compared with uncompressed data for the same data model.
In order to improve the data reliability of the NAND flash memory, we investigate different ECC schemes based on concatenated codes like product codes, half-product codes, and generalized concatenated codes (GCC). We propose a construction for high-rate GCC for hard-input decoding. ECC based on soft-input decoding can significantly improve the reliability of NAND flash memories. Therefore, we propose a low-complexity soft-input decoding algorithm for high-rate GCC.

Lernfabrik
(2016)

Die Einführung von cyberphysischen Systemen in der Fertigung wird die Arbeitsbedingungen und Prozesse genauso wie Geschäftsmodelle stark verändern. In der Praxis kann eine wachsende Diskrepanz zwischen Großunternehmen und KMU beobachtet werden. Genau diese Diskrepanz soll die im Folgenden präsentierte Lernfabrik überbrücken, die Unternehmen eine Plattform zum Probieren bietet, die Möglichkeit zur Ausbildung von Studenten und Mitarbeitern schafft und Beratungsangebote bereithält. Zur Umsetzung wird ein integriertes, offenes und standardisiertes Automatisierungskonzept vorgestellt, das einzelne Geräte, ganze Produktionslinien bis hin zu höheren Automatisierungssystemen umfasst und auch eine Community bereitstellt sowie zur Umsetzung neuer Geschäftsmodelle dient.

Extracting suitable features from acquired data to accurately depict the current health state of a system is crucial in data driven condition monitoring and prediction. Usually, analogue sensor data is sampled at rates far exceeding the Nyquist-rate containing substantial amounts of redundancies and noise, imposing high computational loads due to the subsequent and necessary feature processing chain (generation, dimensionality reduction, rating and selection). To overcome these problems, Compressed Sensing can be used to sample directly to a compressed space, provided the signal at hand and the employed compression/measurement system meet certain criteria. Theory states, that during this compression step enough information is conserved, such that a reconstruction of the original signal is possible with high probability. The proposed approach however does not rely on reconstructed data for condition monitoring purposes, but uses directly the compressed signal representation as feature vector. It is hence assumed that enough information is conveyed by the compression for condition monitoring purposes. To fuse the compressed coefficients into one health index that can be used as input for remaining useful life prediction algorithms and is limited to a reasonable range between 1 and 0, a logistic regression approach is used. Run-to-failure data of three translational electromagnetic actuators is used to demonstrate the health index generation procedure. A comparison to the time domain ground truth signals obtained from Nyquist sampled coil current measurements shows reasonable agreement. I.e. underlying wear-out phenomena can be reproduced by the proposed approach enabling further investigation of the application of prognostic methods.

This work studies a wind noise reduction approach for communication applications in a car environment. An endfire array consisting of two microphones is considered as a substitute for an ordinary cardioid microphone capsule of the same size. Using the decomposition of the multichannel Wiener filter (MWF), a suitable beamformer and a single-channel post filter are derived. Due to the known array geometry and the location of the speech source, assumptions about the signal properties can be made to simplify the MWF beamformer and to estimate the speech and noise power spectral densities required for the post filter. Even for closely spaced microphones, the different signal properties at the microphones can be exploited to achieve a significant reduction of wind noise. The proposed beamformer approach results in an improved speech signal regarding the signal-to-noise-ratio and keeps the linear speech distortion low. The derived post filter shows equal performance compared to known approaches but reduces the effort for noise estimation.

Simon Grimm examines new multi-microphone signal processing strategies that aim to achieve noise reduction and dereverberation. Therefore, narrow-band signal enhancement approaches are combined with broad-band processing in terms of directivity based beamforming. Previously introduced formulations of the multichannel Wiener filter rely on the second order statistics of the speech and noise signals. The author analyses how additional knowledge about the location of a speaker as well as the microphone arrangement can be used to achieve further noise reduction and dereverberation.

This paper focuses on the multivariable control of a drawing tower process. The nature of the process together with the differences in measurement noise levels that affect the variables to be controlled motivated the development of a new MPC algorithm. An extension of a multivariable predictive control algorithm with separated prediction horizons is proposed. The obtained experimental results show the usefulness of the proposed algorithm..

In this paper, the problem of controlling the dissolved oxygen level (DO) during an aerobic fermentation is considered. The proposed approach deals with three major difficulties in respect to the nonlinear dynamics of the DO, the poor accuracy of the empirical models for the oxygen consumption rate and the fact that only sampled measurements are available on-line. A nonlinear integral high-gain control law including a continuous-discrete time observer is designed to keep the DO in the neighborhood of a set point value without any knowledge on the dissolved oxygen consumption rate. The local stability of the control algorithm is proved using Lyapunov tools. The performance of the control scheme is first analyzed in simulation and then experimentally evaluated during a successfull fermentation of the bacteria over a period of three days. Pseudomonas putida mt-2

The computational complexity of the optimal maximum likelihood (ML) detector for spatial modulation increases rapidly as more transmit antennas or larger modulation orders are employed. Hence, ML detection may be infeasible for higher bit rates. This work proposes an improved suboptimal detection algorithm based on the Gaussian approximation method. It is demonstrated that the new method is closely related to the previously published signal vector based detection and the modified maximum ratio combiner, but can improve the detection performance compared to these methods. Furthermore, the performance of different signal constellations with suboptimal detection is investigated. Simulation results indicate that the performance loss compared to ML detection depends heavily on the signal constellation, where the recently proposed Eisenstein integer constellations are beneficial compared to classical QAM or PSK constellations.

Error correction coding based on soft-input decoding can significantly improve the reliability of flash memories. Such soft-input decoding algorithms require reliability information about the state of the memory cell. This work proposes a channel model for soft-input decoding that considers the asymmetric error characteristic of multi-level cell (MLC) and triple-level cell (TLC) memories. Based on this model, an estimation method for the channel state information is devised which avoids additional pilot data for channel estimation. Furthermore, the proposed method supports page-wise read operations.

Generalized concatenated (GC) codes with soft-input decoding were recently proposed for error correction in flash memories. This work proposes a soft-input decoder for GC codes that is based on a low-complexity bit-flipping procedure. This bit-flipping decoder uses a fixed number of test patterns and an algebraic decoder for soft-input decoding. An acceptance criterion for the final candidate codeword is proposed. Combined with error and erasure decoding of the outer Reed-Solomon codes, this bit-flipping decoder can improve the decoding performance and reduce the decoding complexity compared to the previously proposed sequential decoding. The bit-flipping decoder achieves a decoding performance similar to a maximum likelihood decoder for the inner codes.

Error correction coding (ECC) for optical communication and persistent storage systems require high rate codes that enable high data throughput and low residual errors. Recently, different concatenated coding schemes were proposed that are based on binary Bose-Chaudhuri-Hocquenghem (BCH) codes that have low error correcting capabilities. Commonly, hardware implementations for BCH decoding are based on the Berlekamp-Massey algorithm (BMA). However, for single, double, and triple error correcting BCH codes, Peterson's algorithm can be more efficient than the BMA. The known hardware architectures of Peterson's algorithm require Galois field inversion. This inversion dominates the hardware complexity and limits the decoding speed. This work proposes an inversion-less version of Peterson's algorithm. Moreover, a decoding architecture is presented that is faster than decoders that employ inversion or the fully parallel BMA at a comparable circuit size.

The introduction of multiple-level cell (MLC) and triple-level cell (TLC) technologies reduced the reliability of flash memories significantly compared with single-level cell flash. With MLC and TLC flash cells, the error probability varies for the different states. Hence, asymmetric models are required to characterize the flash channel, e.g., the binary asymmetric channel (BAC). This contribution presents a combined channel and source coding approach improving the reliability of MLC and TLC flash memories. With flash memories data compression has to be performed on block level considering short-data blocks. We present a coding scheme suitable for blocks of 1 kB of data. The objective of the data compression algorithm is to reduce the amount of user data such that the redundancy of the error correction coding can be increased in order to improve the reliability of the data storage system. Moreover, data compression can be utilized to exploit the asymmetry of the channel to reduce the error probability. With redundant data, the proposed combined coding scheme results in a significant improvement of the program/erase cycling endurance and the data retention time of flash memories.

Embodiments are generally related to the field of channel and source coding of data to be sent over a channel, such as a communication link or a data memory. Some specific embodiments are related to a method of encoding data for transmission over a channel, a corresponding decoding method, a coding device for performing one or both of these methods and a computer program comprising instructions to cause said coding device to perform one or both of said methods.

This paper presents a new likelihood-based partitioning method of the measurement set for the extended object probability hypothesis density (PHD) filter framework. Recent work has mostly relied on heuristic partitioning methods that cluster the measurement data based on a distance measure between the single measurements. This can lead to poor filter performance if the tracked extended objects are closely spaced. The proposed method called Stochastic Partitioning (StP) is based on sampling methods and was inspired by a former work of Granström et. al. In this work, the StP method is applied to a Gaussian inverse Wishart (GIW) PHD filter and compared to a second filter implementation that uses the heuristic Distance Partitioning (DP) method. The performance is evaluated in Monte Carlo simulations in a scenario where two objects approach each other. It is shown that the sampling based StP method leads to an improved filter performance compared to DP.

Flatness-based feed-forward control of solenoid actuators is considered. For precise motion planning and accurate steering of conventional solenoids, eddy currents cannot be neglected. The system of ordinary differential equations including eddy currents, that describes the nonlinear dynamics of such actuators, is not differentially flat. Thus, a distributed parameter approach based on a diffusion equation is considered, that enables the parametrization of the eddy current by the armature position and its time derivatives. In order to design the feedforward control, the distributed parameter model of the eddy current subsystem is combined with a typical nonlinear lumped parameter model for the electrical and mechanical subsystems of the solenoid. The control design and its application are illustrated by numerical and practical results for an industrial solenoid actuator.

A constructive nonlinear observer design for self-sensing of digital (ON/OFF) single coil electromagnetic actuators is studied. Self-sensing in this context means that solely the available energizing signals, i.e., coil current and driving voltage are used to estimate the position and velocity trajectories of the moving plunger. A nonlinear sliding mode observer is considered, where the stability of the reduced error dynamics is analyzed by the equivalent control method. No simplifications are made regarding magnetic saturation and eddy currents in the underlying dynamical model. The observer gains are constructed by taking into account some generic properties of the systems nonlinearities. Two possible choices of the observer gains are discussed. Furthermore, an observer-based tracking control scheme to achieve sensorless soft landing is considered and its closed-loop stability is studied. Experimental results for observer-based soft landing of a fast-switching solenoid valve under dry conditions are presented to demonstrate the usefulness of the approach.

A constructive method for the design of nonlinear observers is discussed. To formulate conditions for the construction of the observer gains, stability results for nonlinear singularly perturbed systems are utilised. The nonlinear observer is designed directly in the given coordinates, where the error dynamics between the plant and the observer becomes singularly perturbed by a high-gain part of the observer injection, and the information of the slow manifold is exploited to construct the observer gains of the reduced-order dynamics. This is in contrast to typical high-gain observer approaches, where the observer gains are chosen such that the nonlinearities are dominated by a linear system. It will be demonstrated that the considered approach is particularly suited for self-sensing electromechanical systems. Two variants of the proposed observer design are illustrated for a nonlinear electromagnetic actuator, where the mechanical quantities, i.e. the position and the velocity, are not measured

Ein Beitrag zum Beobachterentwurf und zur sensorlosen Folgeregelung translatorischer Magnetaktoren
(2020)

In the field of autonomously driving vehicles the environment perception containing dynamic objects like other road users is essential. Especially, detecting other vehicles in the road traffic using sensor data is of utmost importance. As the sensor data and the applied system model for the objects of interest are noise corrupted, a filter algorithm must be used to track moving objects. Using LIDAR sensors one object gives rise to more than one measurement per time step and is therefore called extended object. This allows to jointly estimate the objects, position, as well as its orientation, extension and shape. Estimating an arbitrary shaped object comes with a higher computational effort than estimating the shape of an object that can be approximated using a basic geometrical shape like an ellipse or a rectangle. In the case of a vehicle, assuming a rectangular shape is an accurate assumption.
A recently developed approach models the contour of a vehicle as periodic B-spline function. This representation is an easy to use tool, as the contour can be specified by some basis points in Cartesian coordinates. Also rotating, scaling and moving the contour is easy to handle using a spline contour. This contour model can be used to develop a measurement model for extended objects, that can be integrated into a tracking filter. Another approach modeling the shape of a vehicle is the so-called bounding box that represents the shape as rectangle.
In this thesis the basics of single, multi and extended object tracking, as well as the basics of B-spline functions are addressed. Afterwards, the spline measurement model is established in detail and integrated into an extended Kalman filter to track a single extended object. An implementation of the resulting algorithm is compared with the rectangular shape estimator. The implementation of the rectangular shape estimator is provided. The comparison is done using long-term considerations with Monte Carlo simulations and by analyzing the results of a single run. Therefore, both algorithms are applied to the same measurements. The measurements are generated using an artificial LIDAR sensor in a simulation environment.
In a real-world tracking scenario detecting several extended objects and measurements that do not originate from a real object, named clutter measurements, is possible. Also, the sudden appearance and disappearance of an object is possible. A filter framework investigated in recent years that can handle tracking multiple objects in a cluttered environment is a random finite set based approach. The idea of random finite sets and its use in a tracking filter is recapped in this thesis. Afterwards, the spline measurement model is included in a multi extended object tracking framework. An implementation of the resulting filter is investigated in a long-term consideration using Monte Carlo simulations and by analyzing the results of a single run. The multi extended object filter is also applied to artificial LIDAR measurements generated in a simulation environment.
The results of comparing the spline based and rectangular based extended object trackers show a more stable performance of the spline extended object tracker. Also, some problems that have to be addressed in future works are discussed. The investigation of the resulting multi extended object tracker shows a successful integration of the spline measurement model in a multi extended object tracker. Also, with these results some problems remain, that have to be solved in future works.