Refine
Year of publication
Document Type
- Conference Proceeding (31)
- Article (15)
- Other Publications (7)
- Working Paper (5)
- Book (2)
- Part of a Book (1)
Language
- English (31)
- German (29)
- Multiple languages (1)
Keywords
- Abrasive grain material (1)
- Abwasserreinigung (1)
- Actuators (1)
- Adaptive Steuerung (1)
- Additive manufacturing (1)
- Aktor (1)
- Aktuatorik (1)
- Anhaftung (1)
- Aquaculture (1)
- Aufsatzsammlung (1)
Investigation of magnetic effects on austenitic stainless steels after low temperature carburization
(2018)
This work aims at investigating the magnetic effects of austenitc stainless steels which can occur after a low temperature carburisation depending on the alloy. Samples were prepared of different alloys and subjected to a multiple low temperature carburisation to obtain different treatment conditions for each alloy. The layer characterisation was carried out by light microscope and also by hardening profiles and shows that the layer develops with each additional treatment cycle. A lattice expansion could be detected in all treated samples by X-ray diffraction. Magnetisability was measured using Feritscope and SQUID measurements. Not all alloys showed magnetisability after treatment. In addition to MFM measurements, experiments with Ferrofluid were also used to visualize the magnetic areas. These studies show that only about half of the formed layer becomes magnetisable and has a domain-like structure.
In Anlehnung an das Tempcore-Verfahren wurde an wärmebehandeltem Stabstahl das Zugverfestigungsverhalten des Kernes, der Außenhaut sowie dem gesamten Stab experimentell und numerisch ermittelt. Es zeigte sich, dass die Dehnungen am Kern und am äußeren Rand gleich sind und der Einfluss des Kerngefüges entscheidend für den Beginn der Einschnürung in der Außenhaut ist. Eine Verbesserung der Eigenschaften des Kerngefüges kann somit die Bruchempfindlichkeit des gesamten Stabes reduzieren.
The corrosion resistance of stainless steels is massively influenced by the condition of their surface. The surface quality includes the topography of the surface, the structure and composition of the passive layer, and the surface near structure of the base material. These factors are influenced by final physical/chemical surface treatments. The presented work shows significantly lower corrosion resistance for mechanical machined specimens than for etched specimens. It also turns out that the rougher the surface, the lower the corrosion resistance gets. However, there is no general finding which shows if blasted or grinded surfaces are more appropriate, but a dependency on process parameters and the characteristics on corrosive exposure in terms of corrosion behavior. The results show that not only the surface roughness Ra has an influence on corrosion behavior but also the shape of peaks and valleys which are evolved by surface treatments. Imperfections in the base material, like sulfidic inclusions lead to a weaker passive layer, respectively, to a decrease of the corrosion resistance. By using special passivating techniques the corrosion resistance of stainless steels can be increased to a higher level in comparison to common passivation.
Corrosion
(2016)
This paper compares the surface morphology of differently finished austenitic stainless steel AISI 316L, also in combination with low temperature carburization. Milled and tumbled surfaces were analyzed by means of corrosion resistance and surface morphology. The results of potentiodynamic measurements show that professional grinding operations with SiC and Al2O3 always lead to a better corrosion resistance of low temperature carburized surfaces compared to the untreated reference in the used acidified chloride solution. Big influence on the corrosion resistance of vibratory ground or tumbled surfaces has the amount of plastic deformation while machining, that has to be kept low for austenitic stainless steels. Due to the high ductility, plastic deformation can lead to the formation of meta stable pits that can be initiation points of corrosion. The formation of meta stable pits can be aggravated by low temperature diffusion processes.
Differences in the pitting resistance between cold worked CrNi and CrNiMnN metastable austenites
(2015)
Fachvortrag auf dem Kongress CORROSION 2015, 15-19 March, Dallas, Texas, USA. NACE International
Hot isostatic pressing (HIP) allows the production of complex components geometry. Generally, a high quality of the components is achieved due to the well managed composition of the metal powder and the non-isotropic properties. If a duplex stainless steel is produced, a heat treatment after the HIP-process is necessary to remove precipitations like carbides, nitrides and intermetallic phases. In a new process, the sintering step should be combined with the heat treatment. In this case a high cooling rate is necessary to avoid precipitations in duplex stainless steels. In this work, the influence of the HIP-temperature and the wall thickness on corrosion resistance, microstructure and impact strength were investigated. The results should help to optimize the process parameters like temperature and cooling rate. For the investigation, two HIP-temperatures were tested in a classical HIP-process step with a defined cooling rate. An additional heat treatment was not conducted. The specimens were cut from different sectors of the HIP-block. For investigation of the corrosion resistance, the critical pitting temperature was determined with electrochemical method according to EN ISO 17864. An impact test was used to determine the impact transition temperature. Metallographic investigations show the microstructure in the different sectors of the HIP-block.