Refine
Document Type
- Conference Proceeding (26)
- Article (5)
- Other Publications (2)
- Part of a Book (1)
- Doctoral Thesis (1)
Has Fulltext
- no (35)
Keywords
- Abrasive grain material (1)
- Anhaftung (1)
- Aquaculture (1)
- Behälterbau (1)
- Corrosion Resistance (1)
- Duplex stainless steel (1)
- Edelstahl Rostfrei (1)
- Expanded austenite layer (1)
- Fish farming (1)
- Geological protection (1)
Adjusting the friction response of the wheel-rail interface is a key factor in the mitigation of wear and rollingcontact fatigue (RCF) in rails. The use of top-of-rail (TOR) friction conditioners has the potential to reduce maintenance costs significantly. Unfortunately, conflicting results on the use of commercial TOR conditioners have been presented in the literature. In this work, the performance of commercial TOR conditioners and a laboratory-made formulation were tested, both on the lab scale and in field measurements. Friction results are discussed together with the structural and chemical analysis of the tested materials.
Die Beständigkeit von hochlegierten korrosions- und säurebeständigen Stählen wird primär durch den Chromgehalt bestimmt. Allerdings gibt es entlang der Wertschöpfungskette von der Stahlerschmelzung bis zum fertigen Produkt eine Vielzahl weiterer Einflussfaktoren. Dem Schleifen kommt hier eine besondere Bedeutung zu, da es je nach Wahl der Prozessparameter sowohl zu einer signifikanten Verschlechterung als auch zu einer Verbesserung der Korrosionsbeständigkeit führen kann. Im vorliegenden Beitrag wird aufgezeigt, dass die erzeugte Rauheit nur eine begrenzte Aussagekraft bietet. Vielmehr erhöhen lokale Mikrodefekte die Anfälligkeit gegen Lochfraß – je nach Ausprägung und Anzahl. Die Automatisierung für die Innenbearbeitung von Behältern im pharmazeutischen Apparatebau kann dabei zu einer signifikanten Verbesserung der Oberfläche und einem homogeneren Erscheinungsbild führen.
Die Fähigkeit zur Erzeugung einer nur wenige Nanometer dicken Passivschicht gelingt nichtrostenden Edelstählen aufgrund deren chemischer Zusammensetzung. Die erzielte Korrosionsbeständigkeit wird allerdings darüber hinaus als Systemeigenschaft von einer Vielzahl von weiteren Faktoren beeinflusst. Die vorliegende Arbeit befasst sich fokussiert mit dem Einfluss der schleiftechnischen Oberflächenbearbeitung von zwei ausgesuchten metastabilen austenitischen Legierungen auf deren Korrosionsverhalten.
Obwohl beide Legierungen eine vergleichbare Beständigkeit gemäß der chemischen Zusammensetzung besitzen, kann gezeigt werden, dass infolge von unterschiedlicher Oberflächenbearbeitung und unterschiedlichem Umformgrad eine starke Variation des Korrosionsverhaltens möglich ist. Es kann ebenfalls nachgewiesen werden, dass die Ausprägung und Anzahl von lokalen Oberflächendefekten hierfür verantwortlich ist. Dem eingesetzten Schleifkornwerkstoff kommt hierbei eine besondere Bedeutung zu.
This paper presents the current state of development and selected technological challenges in the application of ecologically and economically sustainable nets for aquaculture based on ongoing development projects. These aim at the development of a new material system of high-strength stainless steel wires as net material with environmentally compatible antifouling properties for nearshore and offshore aquacultures. Current plastic netting materials will be replaced with high-strength stainless steel to provide a more environmentally friendly system that can withstand more severe mechanical stresses (waves, storms, tides and predators). A new antifouling strategy is expected to solve current challenges, such as ecological damage (e.g., due to pollution from copper-containing antifouling substances or microplastics), high maintenance costs (e.g., cleaning and repairs), and shorter service life. Approaches for the next development steps are presented based on previous experience as well as calculation models based on this experience.
Der digitale Seilüberwacher
(2020)
Low temperature carburizing of a series of austenitic stainless with various combinations of chromium and nickel equivalents was performed. The investigation of the response towards low temperature carburized for three stainless steels with various Cr- and Ni-equivalents showed that the carbon uptake depends significantly on the chemical composition of the base material. The higher carbon content in the expanded austenite layer of specimen 6 (1.4565) and specimen 4 (1.4539/AISI 904L) compared to specimen 2 (1.4404/AISI 316L) is assumed to be mainly related to the difference in the specimens’ chromium content. More chromium leads to more lattice expansion. Along with the higher carbon content, higher hardness values and higher compressive residual stresses in the expanded austenite zone are introduced than for low temperature carburized AISI 316L. The residual stresses obtained from X-ray diffraction lattice strain investigation depend strongly on the chosen X-ray elastic constants. Presently, no values are known for carbon (or nitrogen) stabilized expanded austenite. Nevertheless, first principle elastic constants for γ′&minus Fe4C appear to provide realistic residual stress values. Magnetic force microscopy and measurement with an eddy current probe indicate that austenitic stainless steels can become ferromagnetic upon carburizing, similar for low temperature nitriding. The apparent transition from para- to ferromagnetism cannot be attributed entirely to the interstitially dissolved carbon content in the formed expanded austenite layer but appears to depend also on the metallic composition of the alloy, in particular the Ni content.
The project aims for the development of a new material system from high tensile stainless steel wires as net material with environmentally compatible antifouling properties for off-shore fish farm cages. Therefore, current net materials from textiles (polyamide) shall be partially replaced by high strength stainless steel in order to have a more environmentally compatible system which meets the more severe mechanical loads (waves, storms, predators (sharks)). With a new antifouling strategy current issues like reduced ecological damage (e.g. due to copper disposal), lower maintenance costs (e.g. cleaning) and reduced durability shall be resolved.
Martensitic stainless steels has a wide use, for example for blades, knifes or cutter. The best corrosion resistance of these materials is in hardened condition. For better mechanical properties a tempering is normally applied to increase the durability. The tempering is also reducing the hardness and finally the corrosion resistance. Austempering is meanly used at low alloyed steels and brings a good compromise between durability, hardness and corrosion resistance. For martensitic stainless steels, austempering is normally not a topic because of the very long tempering times.
This work shows first results of austempering of some standard martensitic stainless steels and the influence to corrosion resistance. For reference, hardened and also hardened and tempered specimens were investigated. The corrosions resistance was investigated by electrochemical methods.
The first part of this work shows the development and application of a new material system using high strength duplex stainless steel wires as net material with environmentally compatible antifouling properties for off-shore fish farm cages. Current net materials from textiles (polyamide) shall be partially replaced by high strength duplex stainless steel in order to have a more environmentally compatible system which meets the more severe mechanical loads (waves, storms, predatores (sharks, seals)). With a new antifouling strategy current issues like reduced ecological damage (e.g. due to copper disposal), lower maintenance costs (e.g. cleaning) and reduced durability shall be resolved.
High strength steel wires are also widely used in geological protection systems, for example rockfall protection or slope stabilisation. Normally hot-dip galvanised carbon steel is used in this case. But in highly corrosive environments like coastal areas, volcanic areas or mines for example, other solutions with a high corrosion resistance and sufficient mechanical properties are necessary. Protection systems made of high strength duplex stainless steel wires enable a significantly longer service life of the portection systems and therefore a higher level of security.
Pitting susceptibility of metastable austenitic stainless steels as a function of surface conditions
(2019)
The influence of surface roughness and local defects on pitting susceptibility of type 304 (UNS S30400) and type 301 (UNS S30100) in chloride solution were investigated. Because the mechanical properties can be regarded as decisive for the achieved surface quality, different properties of the base material were obtained by cold rolling the metastable austenites. This was done before the surfaces were finished. Therefor the surfaces were treated by different grinding parameters to generate different surface conditions and different defects. As a reference, different standardised surface finishes were used.
By using and comparing different methods for the characterization of surface roughness and surface texture, it is possible to find a relationship between the quantity and characteristics of local defects on the one hand and pitting susceptibility on the other hand. For the machining parameters used, a ranking of the influencing factors on the corrosion resistance achieved could be determined.
The automated application of software-based solutions for estimating the pitting susceptibility of machined surfaces and components will be discussed using concrete examples.
Pitting susceptibility of metastable austenitic stainless steels as a function of surface conditions
(2019)
Fachvortrag auf der 10th International European Stainless Steel Conference and 6th European Duplex Stainless Steel Conference (ESSC & DUPLEX 2019), 30.09. – 02.10.2019, Vienna, Austria
Fachvortrag auf dem Swiss Tribology Symposium, 12.11.2019, Hightechzentrum Aargau, Brugg, Schweiz
Einfluss der Oberfläche
(2018)