Refine
Document Type
- Conference Proceeding (5) (remove)
Language
- English (5) (remove)
Has Fulltext
- no (5)
Keywords
Institute
Low temperature carburizing of a series of austenitic stainless with various combinations of chromium and nickel equivalents was performed. The investigation of the response towards low temperature carburized for three stainless steels with various Cr- and Ni-equivalents showed that the carbon uptake depends significantly on the chemical composition of the base material. The higher carbon content in the expanded austenite layer of specimen 6 (1.4565) and specimen 4 (1.4539/AISI 904L) compared to specimen 2 (1.4404/AISI 316L) is assumed to be mainly related to the difference in the specimens’ chromium content. More chromium leads to more lattice expansion. Along with the higher carbon content, higher hardness values and higher compressive residual stresses in the expanded austenite zone are introduced than for low temperature carburized AISI 316L. The residual stresses obtained from X-ray diffraction lattice strain investigation depend strongly on the chosen X-ray elastic constants. Presently, no values are known for carbon (or nitrogen) stabilized expanded austenite. Nevertheless, first principle elastic constants for γ′&minus Fe4C appear to provide realistic residual stress values. Magnetic force microscopy and measurement with an eddy current probe indicate that austenitic stainless steels can become ferromagnetic upon carburizing, similar for low temperature nitriding. The apparent transition from para- to ferromagnetism cannot be attributed entirely to the interstitially dissolved carbon content in the formed expanded austenite layer but appears to depend also on the metallic composition of the alloy, in particular the Ni content.
Investigation of magnetic effects on austenitic stainless steels after low temperature carburization
(2018)
Magnetic effects on austenitic stainless steels, formed during a low temperature carburizing depending on the alloy composition are discussed in this paper. Samples of different austenitic stainless steel alloys have been subjected to a multiple low-temperature carburization. Layer characteriszation with light microscope and hardness profiles show a growth of the layer thickness. The formation of an expanded austenite layer (lattice expansion) could be detected by X-ray diffraction (XRD). Feritscope was used to determine the magnetizability, whereby not all austenitic alloys form a magnetizability after treatment. Furthermore, test procedures were developed to visualize the magnetizability. For this purpose, magnetic force microscope measurements and investigations with ferrofluid were carried out and a fir tree ferromagnetic layer strucure could be proven.
Fachvortrag auf der 10th International European Stainless Steel Conference and 6th European Duplex Stainless Steel Conference (ESSC & DUPLEX 2019), 30.09. – 02.10.2019, Vienna, Austria
Pitting susceptibility of metastable austenitic stainless steels as a function of surface conditions
(2019)
The influence of surface roughness and local defects on pitting susceptibility of type 304 (UNS S30400) and type 301 (UNS S30100) in chloride solution were investigated. Because the mechanical properties can be regarded as decisive for the achieved surface quality, different properties of the base material were obtained by cold rolling the metastable austenites. This was done before the surfaces were finished. Therefor the surfaces were treated by different grinding parameters to generate different surface conditions and different defects. As a reference, different standardised surface finishes were used.
By using and comparing different methods for the characterization of surface roughness and surface texture, it is possible to find a relationship between the quantity and characteristics of local defects on the one hand and pitting susceptibility on the other hand. For the machining parameters used, a ranking of the influencing factors on the corrosion resistance achieved could be determined.
The automated application of software-based solutions for estimating the pitting susceptibility of machined surfaces and components will be discussed using concrete examples.