Refine
Year of publication
- 2018 (15) (remove)
Document Type
- Article (6)
- Conference Proceeding (6)
- Doctoral Thesis (2)
- Patent (1)
Has Fulltext
- no (15)
Keywords
Institute
- Institut für Systemdynamik - ISD (15) (remove)
This work studies a wind noise reduction approach for communication applications in a car environment. An endfire array consisting of two microphones is considered as a substitute for an ordinary cardioid microphone capsule of the same size. Using the decomposition of the multichannel Wiener filter (MWF), a suitable beamformer and a single-channel post filter are derived. Due to the known array geometry and the location of the speech source, assumptions about the signal properties can be made to simplify the MWF beamformer and to estimate the speech and noise power spectral densities required for the post filter. Even for closely spaced microphones, the different signal properties at the microphones can be exploited to achieve a significant reduction of wind noise. The proposed beamformer approach results in an improved speech signal regarding the signal-to-noise-ratio and keeps the linear speech distortion low. The derived post filter shows equal performance compared to known approaches but reduces the effort for noise estimation.
Error correction coding based on soft-input decoding can significantly improve the reliability of non-volatile flash memories. This work proposes a soft-input decoder for generalized concatenated (GC) codes. GC codes are well suited for error correction in flash memories for high reliability data storage. We propose GC codes constructed from inner extended binary Bose-Chaudhuri-Hocquenghem (BCH) codes and outer Reed-Solomon codes. The extended BCH codes enable an efficient hard-input decoding. Furthermore, a low-complexity soft-input decoding method is proposed. This bit-flipping decoder uses a fixed number of test patterns and an algebraic decoder for soft-decoding. An acceptance criterion for the final candidate codeword is proposed. Combined with error and erasure decoding of the outer Reed-Solomon codes, this acceptance criterion can improve the decoding performance and reduce the decoding complexity. The presented simulation results show that the proposed bit-flipping decoder in combination with outer error and erasure decoding can outperform maximum likelihood decoding of the inner codes.
Generalised concatenated (GC) codes are well suited for error correction in flash memories for high-reliability data storage. The GC codes are constructed from inner extended binary Bose–Chaudhuri–Hocquenghem (BCH) codes and outer Reed–Solomon codes. The extended BCH codes enable high-rate GC codes and low-complexity soft input decoding. This work proposes a decoder architecture for high-rate GC codes. For such codes, outer error and erasure decoding are mandatory. A pipelined decoder architecture is proposed that achieves a high data throughput with hard input decoding. In addition, a low-complexity soft input decoder is proposed. This soft decoding approach combines a bit-flipping strategy with algebraic decoding. The decoder components for the hard input decoding can be utilised which reduces the overhead for the soft input decoding. Nevertheless, the soft input decoding achieves a significant coding gain compared with hard input decoding.
A constructive nonlinear observer design for self-sensing of digital (ON/OFF) single coil electromagnetic actuators is studied. Self-sensing in this context means that solely the available energizing signals, i.e., coil current and driving voltage are used to estimate the position and velocity trajectories of the moving plunger. A nonlinear sliding mode observer is considered, where the stability of the reduced error dynamics is analyzed by the equivalent control method. No simplifications are made regarding magnetic saturation and eddy currents in the underlying dynamical model. The observer gains are constructed by taking into account some generic properties of the systems nonlinearities. Two possible choices of the observer gains are discussed. Furthermore, an observer-based tracking control scheme to achieve sensorless soft landing is considered and its closed-loop stability is studied. Experimental results for observer-based soft landing of a fast-switching solenoid valve under dry conditions are presented to demonstrate the usefulness of the approach.
This paper focuses on the multivariable control of a drawing tower process. The nature of the process together with the differences in measurement noise levels that affect the variables to be controlled motivated the development of a new MPC algorithm. An extension of a multivariable predictive control algorithm with separated prediction horizons is proposed. The obtained experimental results show the usefulness of the proposed algorithm..
Autonomous moving systems require very detailed information about their environment and potential colliding objects. Thus, the systems are equipped with high resolution sensors. These sensors have the property to generate more than one detection per object per time step. This results in an additional complexity for the target tracking algorithm, since standard tracking filters assume that an object generates at most one detection per object. This requires new methods for data association and system state filtering.
As new data association methods, in this thesis two different extensions of the Joint Integrated Probabilistic Data Association (JIPDA) filter to assign more than one detection to tracks are proposed.
The first method that is introduced, is a generalization of the JIPDA to assign a variable number of measurements to each track based on some predefined statistical models, which will be called Multi Detection - Joint Integrated Probabilistic Data Association (MD-JIPDA).
Since this scheme suffers from exponential increase of association hypotheses, also a new approximation scheme is presented. The second method is an extension for the special case, when the number and locations of measurements are a priori known. In preparation of this method, a new notation and computation scheme for the standard Joint Integrated Data Association is outlined, which also enables the derivation of a new fast approximation scheme called balanced permanent-JIPDA.
For state filtering, also two different concepts are applied: the Random Matrix Framework and the Measurement Generating Points. For the Random Matrix framework, first an alternative prediction method is proposed to account for kinematic state changes in the extension state prediction as well. Secondly, various update methods are investigated to account for the polar to Cartesian noise transformation problem. The filtering concepts are connected with the new MD-JIPDA and their characteristics analyzed with various Monte Carlo simulations.
In case an object can be modeled by a finite number of fixed Measurement Generating Points (MGP), also a proposition to track these object via a JIPDA filter is made. In this context, a fast Track-to-Track fusion algorithm is proposed as well and compared against the MGP-JIPDA.
The proposed algorithms are evaluated in two applications where scanning is done using radar sensors only. The first application is a typical automotive scenario, where a passenger car is equipped with six radar sensors to cover its complete environment.
In this application, the location of the measurements on an object can be considered stationary and that is has a rectangular shape. Thus, the MGP based algorithms are applied here. The filters are evaluated by tracking especially vehicles on nearside lanes.
The second application covers the tracking of vessels on inland waters. Here, two different kind of Radar systems are applied, but for both sensors a uniform distribution of the measurements over the target's extent can be assumed. Further, the assumption that the targets have elliptical shape holds, and so the Random Matrix Framework in combination with the MD-JIPDA is evaluated.
Exemplary test scenarios also illustrate the performance of this tracking algorithm.
Embodiments are generally related to the field of channel and source coding of data to be sent over a channel, such as a communication link or a data memory. Some specific embodiments are related to a method of encoding data for transmission over a channel, a corresponding decoding method, a coding device for performing one or both of these methods and a computer program comprising instructions to cause said coding device to perform one or both of said methods.
This work proposes a construction for low-density parity-check (LDPC) codes over finite Gaussian integer fields. Furthermore, a new channel model for codes over Gaussian integers is introduced and its channel capacity is derived. This channel can be considered as a first order approximation of the additive white Gaussian noise channel with hard decision detection where only errors to nearest neighbors in the signal constellation are considered. For this channel, the proposed LDPC codes can be decoded with a simple non-probabilistic iterative decoding algorithm similar to Gallager's decoding algorithm A.
Digitale Signaturen zum Überprüfen der Integrität von Daten, beispielsweise von Software-Updates, gewinnen zunehmend an Bedeutung. Im Bereich der eingebetteten Systeme kommen derzeit wegen der geringen Komplexität noch überwiegend symmetri-sche Verschlüsselungsverfahren zur Berechnung eines Authentifizierungscodes zum Einsatz. Asym-metrische Kryptosysteme sind rechenaufwendiger, bieten aber mehr Sicherheit, weil der Schlüssel zur Authentifizierung nicht geheim gehalten werden muss. Asymmetrische Signaturverfahren werden typischerweise zweistufig berechnet. Der Schlüssel wird nicht direkt auf die Daten angewendet, sondern auf deren Hash-Wert, der mit Hilfe einer Hash-funktion zuvor berechnet wurde. Zum Einsatz dieser Verfahren in eingebetteten Systemen ist es erforder-lich, dass die Hashfunktion einen hinreichend gro-ßen Datendurchsatz ermöglicht. In diesem Beitrag wird eine effiziente Hardware-Implementierung der SHA-256 Hashfunktion vorgestellt.
Simon Grimm examines new multi-microphone signal processing strategies that aim to achieve noise reduction and dereverberation. Therefore, narrow-band signal enhancement approaches are combined with broad-band processing in terms of directivity based beamforming. Previously introduced formulations of the multichannel Wiener filter rely on the second order statistics of the speech and noise signals. The author analyses how additional knowledge about the location of a speaker as well as the microphone arrangement can be used to achieve further noise reduction and dereverberation.