Refine
Document Type
- Conference Proceeding (8)
- Article (5)
Has Fulltext
- no (13)
Keywords
- Chemical quality criteria (1)
- Fruit drying (1)
- Multi-spectral imaging systems (1)
- Packaging (1)
- Quality prediction (1)
- Solar drying (1)
- Spectral changes (1)
- Storage (1)
- Tomato powder (1)
Institute
When designing drying processes for sensitive biological foodstuffs like fruit or vegetables, energy and time efficiency as well as product quality are gaining more and more importance. These all are greatly influenced by the different drying parameters (e.g. air temperature, air velocity and dew point temperature) in the process. In sterilization of food products the cooking value is widely used as a cross-link between these parameters. In a similar way, the so-called cumulated thermal load (CTL) was introduced for drying processes. This was possible because most quality changes mainly depend on drying air temperature and drying time. In a first approach, the CTL was therefore defined as the time integral of the surface temperature of agricultural products. When conducting experiments with mangoes and pineapples, however, it was found that the CTL as it was used had to be adjusted to a more practical form. So the definition of the CTL was improved and the behaviour of the adjusted CTL (CTLad) was investigated in the drying of pineapples and mangoes. On the basis of these experiments and the work that had been done on the cooking value, it was found, that more optimization on the CTLad had to be done to be able to compare a great variety of different products as well as different quality parameters.
In tomato drying, degradation in final quality may occur based on the drying method used and predrying preparation. Hence, this research was conducted to evaluate the effect of different predrying treatments on physicochemical quality and drying kinetics of twin-layer-solar-tunnel-dried tomato slices. During the experimental work, tomato slices of var. Galilea were used. As predrying treatments, 0.5% calcium chloride (CaCl2), 0.5% ascorbic acid (C6H8O6), 0.5% citric acid (C6H8O7), and 0.5% sodium chloride (NaCl) were used. The tomato samples were sliced to 5 mm thickness, socked in the pretreatments for ten minutes, and dried in a twin layer solar tunnel dryer under the weather conditions of Jimma, Ethiopia. Untreated samples were used as control. The moisture losses from the samples were monitored by weighing samples at 2 h interval from each treatment. SAS statistical software version 9.2 was used for analyzing data on the physicochemical quality of tomato slices in CRD with three replications. From the experimental result, it was observed that dried tomato slices pretreated with 0.5% ascorbic acid gave the best retention of vitamin C and total phenolic content with a high sugar/acid ratio. Better retention of lycopene and fast drying were observed in dried tomato slices pretreated with 0.5% sodium chloride, and pretreating tomatoes with 0.5% citric acid resulted in better color values than the other treatments. Compared to the control, pretreating significantly preserved the overall quality of dried tomato slices and increased the moisture removal rate in the twin layer solar tunnel dryer.
In this work, a storage study was conducted to find suitable packaging material for tomato powder storage. Experiments were laid out in a single factor completely randomized design (CRD) to study the effect of packaging materials on lycopene, vitamin C moisture content, and water activity of tomato powder; The factor (packaging materials) has three levels (low‐density polyethylene bag, polypropylene bottle, wrapped with aluminum foils, and packed in low‐density polyethylene bag) and is replicated three times. During the study, a twin layer solar tunnel dried tomato slices of var. Galilea was used. The dried tomato slices were then ground and packed (40 g each) in the packaging materials and stored at room temperature. Samples were drawn from the packages at 2‐month interval for quality analysis and SAS (version 9.2) software was used for statistical analysis. From the result, higher retention of lycopene (80.13%) and vitamin C (49.32%) and a nonsignificant increase in moisture content and water activity were observed for tomato powder packed in polypropylene bottles after 6 months of storage. For low‐density polyethylene packed samples and samples wrapped with aluminum foil and packed in a low‐density polyethylene bag, 57.06% and 60.45% lycopene retention and 42.9% and 49.23% Vitamin C retention were observed, respectively, after 6 months of storage. Considering the results found, it can be concluded that lycopene and vitamin C content of twin layer solar tunnel dried tomato powder can be preserved at ambient temperature storage by packing in a polypropylene bottle with a safe range of moisture content and water activity levels for 6 months.
In modern fruit processing technology, non-destructive quality measuring techniques aresought for determining and controlling changes in the optical, structural, and chemical properties of theproducts. In this context, changes inside the product can be measured during processing. Especiallyfor industrial use, fast, precise, but robust methods are particularly important to obtain high-qualityproducts. In this work, a newly developed multi-spectral imaging system was implemented andadapted for drying processes. Further it was investigated if the system could be used to link changesin the surface spectral reflectance during mango drying with changes in moisture content andcontents of chemical components. This was achieved by recovering the spectral reflectance frommulti-spectral image data and comparing the spectral changes with changes of the total soluble solids(TSS), pH-value and the relative moisture contentxwbof the products. In a first step, the camera wasmodified to be used in drying, then the changes in the spectra and quality criteria during mangodrying were measured. For this, mango slices were dried at air temperatures of 40–80◦C and relativeair humidities of 5%–30%. Samples were analyzed and pictures were taken with the multi-spectralimaging system. The quality criteria were then predicted from spectral data. It could be shown thatthe newly developed multi-spectral imaging system can be used for quality control in fruit drying.There are strong indications as well, that it can be employed for the prediction of chemical qualitycriteria of mangoes during drying. This way, quality changes can be monitored inline during theprocess using only one single measuring device.
Besides energy efficiency, product quality is gaining importance in the design of drying processes for sensitive biological foodstuffs. The influence of drying parameters on the drying kinetics of apples has been extensively investigated; the information about effects on product quality available in literature however, is often contradictory. Furthermore quality changes obtained applying different drying parameters are usually hard to compare. As most quality changes can be expressed as zero, first or second order reactions and mainly depend on drying air temperature and drying time, it would be desirable to cross-check the results in function thereof. This paper introduces a method of quality determination using a new reference value, the cumulated thermal load. It is defined as the time integral of the product surface temperature and improves the comparability of quality changes obtained by different experimental settings in drying of apples and tomatoes. It could be shown that quality parameters like color changes and shrinkage during apple drying and the content of temperature sensitive acids in tomatoes vary linearly with the integral of product temperature over time.
Production and marketing of cereal grains are some of the main activities in developing countries to ensure food security. However, the food gap is complicated further by high postharvest loss of grains during storage. This study aimed to compare low‐cost modified‐atmosphere hermetic storage structures with traditional practice to minimize quantitative and qualitative losses of grains during storage. The study was conducted in two phases: in the first phase, seven hermetic storage structures with or without smoke infusion were compared, and one selected structure was further validated at scaled‐up capacity in the second phase.
Post harvest technology
(2015)