The trajectory tracking problem for a fully-actuated real-scaled surface vessel is addressed in this paper by designing a backstepping controller with a multivariable integral action, considering the thruster allocation problem. The performance and robustness of this controller are evaluated in simulation, taking into account environmental disturbance forces and modeling mismatch, using a docking maneuver as a reference trajectory. Furthermore, a comparison between the backstepping controller and a nonlinear position PID-Control with flatness based-feedforward is also analyzed.
This paper presents a modeling approach of an industrial heating process where a stripe-shaped workpiece is heated up to a specific temperature by applying hot air through a nozzle. The workpiece is moving through the heating zone and is considered to be of infinite length. The speed of the substrate is varying over time. The derived model is supposed to be computationally cheap to enable its use in a model-based control setting. We start by formulating the governing PDE and the corresponding boundary conditions. The PDE is then discretized on a spatial grid using finite differences and two different integration schemes, explicit and implicit, are derived. The two models are evaluated in terms of computational effort and accuracy. It turns out that the implicit approach is favorable for the regarded process. We optimize the grid of the model to achieve a low number of grid nodes while maintaining a sufficient amount of accuracy. Finally, the thermodynamical parameters are optimized in order to fit the model's output to real-world data that was obtained by experiments.
The trajectory tracking problem for a real-scaled fully-actuated surface vessel is addressed in this paper. A nonlinear model predictive control (NMPC) scheme was designed to track a reference trajectory, considering state and input constraints, and environmental disturbances, which were assumed to be constant over the prediction horizon. The controller was tested by performing docking maneuvers using the real-scaled research vessel from the University of Applied Sciences Konstanz at the Rhine river in Germany. A comparison between the experimental results and the simulated ones was analyzed to validate the NMPC controller.
In this paper, approximating the shape of a sailing boat using elliptic cones is investigated. Measurements are assumed to be gathered from the target's surface recorded by 3D scanning devices such as multilayer LiDAR sensors. Therefore, different models for estimating the sailing boat's extent are presented and evaluated in simulated and real-world scenarios. In particular, the measurement source association problem is addressed in the models. Simulated investigations are conducted with a static and a moving elliptic cone. The real-world scenario was recorded with a Velodyne Alpha Prime (VLP-128) mounted on a ferry of Lake Constance. Final results of this paper constitute the extent estimation of a single sailing boat using LiDAR data applying various measurement models.
Multi-object tracking filters require a birth density to detect new objects from measurement data. If the initial positions of new objects are unknown, it may be useful to choose an adaptive birth density. In this paper, a circular birth density is proposed, which is placed like a band around the surveillance area. This allows for 360° coverage. The birth density is described in polar coordinates and considers all point-symmetric quantities such as radius, radial velocity and tangential velocity of objects entering the surveillance area. Since it is assumed that these quantities are unknown and may vary between different targets, detected trajectories, and in particular their initial states, are used to estimate the distribution of initial states. The adapted birth density is approximated as a Gaussian mixture, so that it can be used for filters operating on Cartesian coordinates.
Virtual measurement models (VMM) can be used to generate artificial measurements and emulate complex sensor models such as Lidar. The input of the VMM is an estimation and the output is the set of measurements this estimation would cause. A Kalman filter with extension estimation based on random matrices is used to filter mean and covariance of the real measurements. If these match the mean and covariance of the artificial measurements, then the given estimation is appropriate. The optimal input of the VMM is found using an adaptation algorithm. In this paper, the VMM approach is expanded for multi-extended object tracking where objects can be occluded and are only partially visible. The occlusion can be compensated if the extension estimation is performed for all objects together. The VMM now receives as input an estimation for the multi-object state and the output are the measurements that this multi-object state would cause.
Feature-Based Proposal Density Optimization for Nonlinear Model Predictive Path Integral Control
(2022)
This paper presents a novel feature-based sampling strategy for nonlinear Model Predictive Path Integral (MPPI) control. In MPPI control, the optimal control is calculated by solving a stochastic optimal control problem online using the weighted inference of stochastic trajectories. While the algorithm can be excellently parallelized the closed- loop performance is dependent on the information quality of the drawn samples. Because these samples are drawn using a proposal density, its quality is crucial for the solver and thus the controller performance. In classical MPPI control, the explored state-space is strongly constrained by assumptions that refer to the control value variance, which are necessary for transforming the Hamilton-Jacobi-Bellman (HJB) equation into a linear second-order partial differential equation. To achieve excellent performance even with discontinuous cost-functions, in this novel approach, knowledge-based features are used to determine the proposal density and thus, the region of state- space for exploration. This paper addresses the question of how the performance of the MPPI algorithm can be improved using a feature-based mixture of base densities. Further, the developed algorithm is applied on an autonomous vessel that follows a track and concurrently avoids collisions using an emergency braking feature.
This paper presents a systematic comparison of different advanced approaches for motion prediction of vessels for docking scenarios. Therefore, a conventional nonlinear gray-box-model, its extension to a hybrid model using an additional regression neural network (RNN) and a black-box-model only based on a RNN are compared. The optimal hyperparameters are found by grid search. The training and validation data for the different models is collected in full-scale experiments using the solar research vessel Solgenia. The performances of the different prediction models are compared in full-scale scenarios. %To use the investigated approaches for controller design, a general optimal control problem containing the advanced models is described. These can improve advanced control strategies e.g., nonlinear model predictive control (NMPC) or reinforcement learning (RL). This paper explores the question of what the advantages and disadvantages of the different presented prediction approaches are and how they can be used to improve the docking behavior of a vessel.
This paper presents the swinging up and stabilization control of a Furuta pendulum using the recently published nonlinear Model Predictive Path Integral (MPPI) approach. This algorithm is based on a path integral over stochastic trajectories and can be parallelized easily. The controller parameters are tuned offline regarding the nonlinear system dynamics and simulations. Constraints in terms of state and input are taken into account in the cost function. The presented approach sequentially computes an optimal control sequence that minimizes this optimal control problem online. The control strategy has been tested in full-scale experiments using a pendulum prototype. The investigated MPPI controller has demonstrated excellent performance in simulation for the swinging up and stabilizing task. In order to also achieve outstanding performance in a real-world experiment using a controller with limited computing power, a linear quadratic controller (LQR) is designed for the stabilization task. In this paper, the determination of the controller parameters for the MPPI algorithm is described in detail. Further, a discussion treats the advantages of the nonlinear MPPI control.
Docking Control of a Fully-Actuated Autonomous Vessel using Model Predictive Path Integral Control
(2022)
This paper presents the docking control of an autonomous vessel using the nonlinear Model Predictive Path Integral (MPPI) approach. This algorithm is based on a path integral over stochastic trajectories and can be parallelized easily. The controller parameters are tuned offline using knowledge of the system and simulations, including nonlinear state and disturbance observer. The cost function implicitly contains information regarding the surrounding of the docking position. This approach allows continuous optimization of the trajectory with respect to the system state, disturbance state and actuator dynamics. The control strategy has been tested in full-scale experiments using the solar research vessel Solgenia. The investigated MPPI controller has demonstrated excellent performance in both, simulation and real-world experiments. This paper addresses the question of how the MPPI algorithm can be applied to dock a fully-actuated vessel and what benefits its application achieves.