Refine
Document Type
- Conference Proceeding (22)
- Article (6)
- Part of a Book (1)
Language
- English (29) (remove)
Has Fulltext
- no (29) (remove)
Keywords
- Abrasive grain material (1)
- Actuators (1)
- Aquaculture (1)
- Austenitic stainless steels (1)
- Corrosion Resistance (1)
- Corrosion resistance (1)
- Duplex stainless steel (1)
- Dynamic testing plant (1)
- Dynamic tests (1)
- Espanded austenite, Magnetic force microscopy, Low temperature carburisation, Ferrofluid (1)
Magnetic effects on austenitic stainless steels, formed during a low temperature carburizing depending on the alloy composition are discussed in this paper. Samples of different austenitic stainless steel alloys have been subjected to a multiple low-temperature carburization. Layer characteriszation with light microscope and hardness profiles show a growth of the layer thickness. The formation of an expanded austenite layer (lattice expansion) could be detected by X-ray diffraction (XRD). Feritscope was used to determine the magnetizability, whereby not all austenitic alloys form a magnetizability after treatment. Furthermore, test procedures were developed to visualize the magnetizability. For this purpose, magnetic force microscope measurements and investigations with ferrofluid were carried out and a fir tree ferromagnetic layer strucure could be proven.
The first part of this work shows the development and application of a new material system using high strength duplex stainless steel wires as net material with environmentally compatible antifouling properties for off-shore fish farm cages. Current net materials from textiles (polyamide) shall be partially replaced by high strength duplex stainless steel in order to have a more environmentally compatible system which meets the more severe mechanical loads (waves, storms, predatores (sharks, seals)). With a new antifouling strategy current issues like reduced ecological damage (e.g. due to copper disposal), lower maintenance costs (e.g. cleaning) and reduced durability shall be resolved.
High strength steel wires are also widely used in geological protection systems, for example rockfall protection or slope stabilisation. Normally hot-dip galvanised carbon steel is used in this case. But in highly corrosive environments like coastal areas, volcanic areas or mines for example, other solutions with a high corrosion resistance and sufficient mechanical properties are necessary. Protection systems made of high strength duplex stainless steel wires enable a significantly longer service life of the portection systems and therefore a higher level of security.
Pitting susceptibility of metastable austenitic stainless steels as a function of surface conditions
(2019)
The influence of surface roughness and local defects on pitting susceptibility of type 304 (UNS S30400) and type 301 (UNS S30100) in chloride solution were investigated. Because the mechanical properties can be regarded as decisive for the achieved surface quality, different properties of the base material were obtained by cold rolling the metastable austenites. This was done before the surfaces were finished. Therefor the surfaces were treated by different grinding parameters to generate different surface conditions and different defects. As a reference, different standardised surface finishes were used.
By using and comparing different methods for the characterization of surface roughness and surface texture, it is possible to find a relationship between the quantity and characteristics of local defects on the one hand and pitting susceptibility on the other hand. For the machining parameters used, a ranking of the influencing factors on the corrosion resistance achieved could be determined.
The automated application of software-based solutions for estimating the pitting susceptibility of machined surfaces and components will be discussed using concrete examples.
Ferromagnetism is of increasing importance in the growing field of electromobility and data storage. In stable austenitic steels, the occurrence of ferromagnetism is not expected and would also interfere with many applications. However, ferromagnetism in austenitic stainless steels after low-temperature nitriding has already been shown in the past. Herein, the presence of ferromagnetism in austenitic steels is discovered after low-temperature carburization (Kolsterizing), which represents a novel and unique finding. A zone of expanded austenite is established on various austenitic stainless steels by low-temperature carburization and the respective ferromagnetism is investigated in relation to the alloy composition. The ferromagnetism occurring is determined by means of a commercial magnetoinductive sensor (Feritscope). Ferromagnetic domains are visualized by magnetic force microscopy and a ferrofluid. X-ray diffraction measurements indicate a clear difference in the lattice expansion of the different alloys. Furthermore, a different appearance of the magnetizable microstructure regions (magnetic domain structure) is detected depending on the grain orientation determined by electron backscatter diffraction (EBSD). Strongly pronounced magnetic domains show no linear lattice defects, whereas in small magnetizable areas linear lattice defects are detected by electron channeling contrast imaging and EBSD.
This paper presents the current state of development and selected technological challenges in the application of ecologically and economically sustainable nets for aquaculture based on ongoing development projects. These aim at the development of a new material system of high-strength stainless steel wires as net material with environmentally compatible antifouling properties for nearshore and offshore aquacultures. Current plastic netting materials will be replaced with high-strength stainless steel to provide a more environmentally friendly system that can withstand more severe mechanical stresses (waves, storms, tides and predators). A new antifouling strategy is expected to solve current challenges, such as ecological damage (e.g., due to pollution from copper-containing antifouling substances or microplastics), high maintenance costs (e.g., cleaning and repairs), and shorter service life. Approaches for the next development steps are presented based on previous experience as well as calculation models based on this experience.