Refine
Document Type
- Article (19) (remove)
Language
- English (19)
Keywords
- Channel capacity (1)
- Channel coding (1)
- Channel estimation (1)
- Channel fading (1)
- Code-based cryptography (1)
- Code-based cryptosystem (1)
- Coded modulation (1)
- Computational complexity (1)
- Computer Science Applications (1)
- Concatenated codes (2)
Institute
- Institut für Systemdynamik - ISD (19) (remove)
This work studies a wind noise reduction approach for communication applications in a car environment. An endfire array consisting of two microphones is considered as a substitute for an ordinary cardioid microphone capsule of the same size. Using the decomposition of the multichannel Wiener filter (MWF), a suitable beamformer and a single-channel post filter are derived. Due to the known array geometry and the location of the speech source, assumptions about the signal properties can be made to simplify the MWF beamformer and to estimate the speech and noise power spectral densities required for the post filter. Even for closely spaced microphones, the different signal properties at the microphones can be exploited to achieve a significant reduction of wind noise. The proposed beamformer approach results in an improved speech signal regarding the signal-to-noise-ratio and keeps the linear speech distortion low. The derived post filter shows equal performance compared to known approaches but reduces the effort for noise estimation.
Error correction coding based on soft-input decoding can significantly improve the reliability of non-volatile flash memories. This work proposes a soft-input decoder for generalized concatenated (GC) codes. GC codes are well suited for error correction in flash memories for high reliability data storage. We propose GC codes constructed from inner extended binary Bose-Chaudhuri-Hocquenghem (BCH) codes and outer Reed-Solomon codes. The extended BCH codes enable an efficient hard-input decoding. Furthermore, a low-complexity soft-input decoding method is proposed. This bit-flipping decoder uses a fixed number of test patterns and an algebraic decoder for soft-decoding. An acceptance criterion for the final candidate codeword is proposed. Combined with error and erasure decoding of the outer Reed-Solomon codes, this acceptance criterion can improve the decoding performance and reduce the decoding complexity. The presented simulation results show that the proposed bit-flipping decoder in combination with outer error and erasure decoding can outperform maximum likelihood decoding of the inner codes.
Generalised concatenated (GC) codes are well suited for error correction in flash memories for high-reliability data storage. The GC codes are constructed from inner extended binary Bose–Chaudhuri–Hocquenghem (BCH) codes and outer Reed–Solomon codes. The extended BCH codes enable high-rate GC codes and low-complexity soft input decoding. This work proposes a decoder architecture for high-rate GC codes. For such codes, outer error and erasure decoding are mandatory. A pipelined decoder architecture is proposed that achieves a high data throughput with hard input decoding. In addition, a low-complexity soft input decoder is proposed. This soft decoding approach combines a bit-flipping strategy with algebraic decoding. The decoder components for the hard input decoding can be utilised which reduces the overhead for the soft input decoding. Nevertheless, the soft input decoding achieves a significant coding gain compared with hard input decoding.
Error correction coding for optical communication and storage requires high rate codes that enable high data throughput and low residual errors. Recently, different concatenated coding schemes were proposed that are based on binary BCH codes with low error correcting capabilities. In this work, low-complexity hard- and soft-input decoding methods for such codes are investigated. We propose three concepts to reduce the complexity of the decoder. For the algebraic decoding we demonstrate that Peterson's algorithm can be more efficient than the Berlekamp-Massey algorithm for single, double, and triple error correcting BCH codes. We propose an inversion-less version of Peterson's algorithm and a corresponding decoding architecture. Furthermore, we propose a decoding approach that combines algebraic hard-input decoding with soft-input bit-flipping decoding. An acceptance criterion is utilized to determine the reliability of the estimated codewords. For many received codewords the stopping criterion indicates that the hard-decoding result is sufficiently reliable, and the costly soft-input decoding can be omitted. To reduce the memory size for the soft-values, we propose a bit-flipping decoder that stores only the positions and soft-values of a small number of code symbols. This method significantly reduces the memory requirements and has little adverse effect on the decoding performance.
The performance and reliability of non-volatile NAND flash memories deteriorate as the number of program/erase cycles grows. The reliability also suffers from cell to cell interference, long data retention time, and read disturb. These processes effect the read threshold voltages. The aging of the cells causes voltage shifts which lead to high bit error rates (BER) with fixed pre-defined read thresholds. This work proposes two methods that aim on minimizing the BER by adjusting the read thresholds. Both methods utilize the number of errors detected in the codeword of an error correction code. It is demonstrated that the observed number of errors is a good measure for the voltage shifts and is utilized for the initial calibration of the read thresholds. The second approach is a gradual channel estimation method that utilizes the asymmetrical error probabilities for the one-to-zero and zero-to-one errors that are caused by threshold calibration errors. Both methods are investigated utilizing the mutual information between the optimal read voltage and the measured error values.
Numerical results obtained from flash measurements show that these methods reduce the BER of NAND flash memories significantly.
The Burrows–Wheeler transformation (BWT) is a reversible block sorting transform that is an integral part of many data compression algorithms. This work proposes a memory-efficient pipelined decoder for the BWT. In particular, the authors consider the limited context order BWT that has low memory requirements and enable fast encoding. However, the decoding of the limited context order BWT is typically much slower than the encoding. The proposed decoder pipeline provides a fast inverse BWT by splitting the decoding into several processing stages which are executed in parallel.
Modular arithmetic over integers is required for many cryptography systems. Montgomeryreduction is an efficient algorithm for the modulo reduction after a multiplication. Typically, Mont-gomery reduction is used for rings of ordinary integers. In contrast, we investigate the modularreduction over rings of Gaussian integers. Gaussian integers are complex numbers where the real andimaginary parts are integers. Rings over Gaussian integers are isomorphic to ordinary integer rings.In this work, we show that Montgomery reduction can be applied to Gaussian integer rings. Twoalgorithms for the precision reduction are presented. We demonstrate that the proposed Montgomeryreduction enables an efficient Gaussian integer arithmetic that is suitable for elliptic curve cryptogra-phy. In particular, we consider the elliptic curve point multiplication according to the randomizedinitial point method which is protected against side-channel attacks. The implementation of thisprotected point multiplication is significantly faster than comparable algorithms over ordinary primefields.
In this letter, we present an approach to building a new generalized multistream spatial modulation system (GMSM), where the information is conveyed by the two active antennas with signal indices and using all possible active antenna combinations. The signal constellations associated with these antennas may have different sizes. In addition, four-dimensional hybrid frequency-phase modulated signals are utilized in GMSM. Examples of GMSM systems are given and computer simulation results are presented for transmission over Rayleigh and deep Nakagami- m flat-fading channels when maximum-likelihood detection is used. The presented results indicate a significant improvement of characteristics compared to the best-known similar systems.
Generalized Concatenated Codes over Gaussian and Eisenstein Integers for Code-Based Cryptography
(2021)
The code-based McEliece and Niederreiter cryptosystems are promising candidates for post-quantum public-key encryption. Recently, q-ary concatenated codes over Gaussian integers were proposed for the McEliece cryptosystem together with the one-Mannheim error channel, where the error values are limited to Mannheim weight one. Due to the limited error values, the codes over Gaussian integers achieve a higher error correction capability than maximum distance separable (MDS) codes with bounded minimum distance decoding. This higher error correction capability improves the work factor regarding decoding attacks based on information-set decoding. The codes also enable a low complexity decoding algorithm for decoding beyond the guaranteed error correction capability. In this work, we extend this coding scheme to codes over Eisenstein integers. These codes have advantages for the Niederreiter system. Additionally, we propose an improved code construction based on generalized concatenated codes. These codes extent the rate region where the work factor is beneficial compared to MDS codes. Moreover, generalized concatenated codes are more robust against structural attacks than ordinary concatenated codes.
In this article, we give the construction of new four-dimensional signal constellations in the Euclidean space, which represent a certain combination of binary frequency-shift keying (BFSK) and M-ary amplitude-phase-shift keying (MAPSK). Description of such signals and the formulas for calculating the minimum squared Euclidean distance are presented. We have developed an analytic building method for even and odd values of M. Hence, no computer search and no heuristic methods are required. The new optimized BFSK-MAPSK (M = 5,6,···,16) signal constructions are built for the values of modulation indexes h =0.1,0.15,···,0.5 and their parameters are given. The results of computer simulations are also provided. Based on the obtained results we can conclude, that BFSK-MAPSK systems outperform similar four-dimensional systems both in terms of minimum squared Euclidean distance and simulated symbol error rate.