Refine
Document Type
- Conference Proceeding (64)
- Article (27)
- Doctoral Thesis (8)
- Master's Thesis (2)
- Patent (1)
- Report (1)
Keywords
Institute
- Institut für Systemdynamik - ISD (103) (remove)
This thesis presents the development of two different state-feedback controllers to solve the trajectory tracking problem, where the vessel needs to reach and follow a time-varying reference trajectory. This motion problem was addressed to a real-scaled fully actuated surface vessel, whose dynamic model had unknown hydrodynamic and propulsion parameters that were identified by applying an experimental maneuver-based identification process. This dynamic model was then used to develop the controllers. The first one was the backstepping controller, which was designed with a local exponential stability proof. For the NMPC, the controller was developed to minimize the tracking error, considering the thrusters’ constraints. Moreover, both controllers considered the thruster allocation problem and counteracted environmental disturbance forces such as current, waves and wind.The effectiveness of these approaches was verified in simulation using Matlab/Simulink and GRAMPC (in the case of the NMPC), and in experimental scenarios, where they were applied to the vessel, performing docking maneuvers at the Rhine River in Constance (Germany).
In 3D extended object tracking (EOT), well-established models exist for tracking the object extent using various shape priors. A single update, however, has to be performed for every measurement using these models leading to a high computational runtime for high-resolution sensors. In this paper, we address this problem by using various model-independent downsampling schemes based on distance heuristics and random sampling as pre-processing before the update. We investigate the methods in a simulated and real-world tracking scenario using two different measurement models with measurements gathered from a LiDAR sensor. We found that there is a huge potential for speeding up 3D EOT by dropping up to 95\% of the measurements in our investigated scenarios when using random sampling. Since random sampling, however, can also result in a subset that does not represent the total set very well, leading to a poor tracking performance, there is still a high demand for further research.
Recently published nonlinear model-based control
approaches achieve impressive performances in complex real-
world applications. However, due to model-plant mismatches
and unforeseen disturbances, the model-based controller’s per-
formance is limited in full-scale applications. In most applica-
tions, low-level control loops mitigate the model-plant mismatch
and the sensitivity to disturbances. But what is the influence
of these low-level control loops? In this paper, we present
the model predictive path integral (MPPI) control of a self-
balancing vehicle and investigate the influence of subordinate
control loops on closed-loop performance. Therefore, simulation
and full-scale experiments are performed and analyzed. Subor-
dinate control loops empower the MPPI controller because they
dampen the influence of disturbances, and thus improve the
model’s accuracy. This is the basis for the successful application
of model-based control approaches in real-world systems. All
in all, a model is used to design a low-level controller, then
its closed-loop behavior is determined, and this model is used
within the superimposed MPPI control loop – modeling for
control and vice versa.